Check 220-1101 Free Exam Dumps Questions - Find Best CompTIA A+ 220-1101 Exam Dumps

Check 220-1101 Free Exam Dumps Questions – Find Best CompTIA A+ 220-1101 Exam Dumps

Eleanor2024-10-14T15:31:34+00:00

By Eleanor CompTIA, CompTIA A+

New CompTIA A+ Series (220-1101 & 220-1102) exams are highly recommended to all CompTIA A+ candidates because the 220-1001 and 220-1002 exams are retiring. Finding the best 220-1101 exam dumps is a popular way to prepare for the 220-1101 CompTIA A+ Certification Exam: Core 1. It is offering the best CompTIA 220-1101 exam dumps that help and guide you to get success easily in your 220-1101 CompTIA A+ Core 1 Certification Exam. You can check CompTIA A+ 220-1101 free exam dumps online to find why we recommend ITPrepare CompTIA A+ 220-1101 exam dumps.

Page 1 of 3

1. A field technician has been dispatched to a site with an internet outage. Upon arriving, the technician discovers that the POTS lines are not working as well.

Which of the following technologies is the site MOST likely using?

Fiber

Cable

DSL

Satellite

2. An engineer is experiencing unexpected reboots on a graphics workstation when rendering complex 3-D models. The workstation is configured with a 115V power supply that is rated at 200W and connected to a UPS. The central processing unit contains 16 hyperthreaded cores, and a discrete graphics solution utilizing an 8-pin power connector is installed in a PCI Express x16 slot.

Which of the following indicates where the technician should begin troubleshooting?

The UPS, as 115V is insufficient for the configuration and should be increased to 220V

The power supply, as 200W is insufficient when the GPU is heavily tasked

The graphics card, as it is the component that triggers the unexpected reboots

The motherboard, as only standard PCI slots should be used for high-end graphics cards, not PCI Express slots

3. A technician needs to fix a Cat 5 cable issue. The cable, which is connected to a network jack, fails when it is moved around.

Which of the following items must the technician use to fix the issue? (Select TWO).

Scissors

Network tap

Magnetized screwdriver

Tone generator

RJ45 connector

Crimper

4. A technician needs to recommend an internet connection for a customer who travels around the world and wants to have connectivity while visiting remote camping locations. Some of the locations the customer visits have limited or unreliable cellular service.

Which of the following connection types should the technician recommend?

Satellite

DSL

Fiber

Hotspot

5. An organization has some computers running macOS and some computers running Windows. The computers running macOS also need to run a piece of software that is only available on Windows.

Which of the following BEST describes the solution for running Windows software on a computer running macOS?

Operating system spoofing

Remote software provisioning

Indirect software implementation

Cross-platform virtualization

6. A customer reports that a computer is never able to reach more than a 100Mbps transfer data rate, even when using a Gigabit LAN card. While troubleshooting, the technician notices the network cable needs to be replaced.

Which of the following cable categories is limiting the transfer speed?

Cat 5

Cat 5e

Cat 6

Cat 6a

7. A customer is using a satellite internet connection that is experiencing slowness. A technician notices high latency while pinging, but the download test is performing perfectly with very good download speeds.

Which of the following represents the NEXT action the technician should perform?

Restart the modem and run an online internet connection and speed diagnostic tool.

Guide the customer on how to upgrade the internet plan with the provider in order to improve latency.

Explain to the customer this is not an issue; this situation is normal for this type of internet connection.

Replace the modem because it is not working correctly based on the test result.

8. While implementing a non-carrier-grade wireless backhaul, a technician notices the current channel selection is extremely polluted with various RF signals. Upon performing a spectral analysis, the technician discovers a channel containing almost no RF pollution. Unfortunately, the technician is unable to select that channel.

Which of the following is the MOST likely reason for this issue?

The channel is reserved for licensed band use.

The channel selection is defective; contact the manufacturer.

The channel must be unlocked by the vendor.

The device requires a firmware update to unlock the channel.

9. A company just bought a printer capable of automatically printing on both sides of the paper After installation, however, the technician can only print on both sides of the paper manually.

Which of the following should the technician do to fix the issue?

Install the most recent firmware upgrade available for the printer.

Contact the vendor for a hardware replacement.

Reinstall the printer software and drivers, and then restart the printer.

Read the installation manual and configure duplex settings.

10. A user, who is attempting to give a presentation via a projector in a conference room, reports the projector has video but no audio.

Which of the following will MOST likely resolve the issue?

Changing the input on the projector to VGA

Changing the output on the PC to DVI

Modifying the projector's refresh rate

Utilizing an HDMI connection

Page 2 of 3

11. Which of the following should the data center hardware technician implement to ensure maximum uptime for customers' virtual machines?

Line conditioner

AC voltage regulator

Uninterruptible power supply

Cloud storage backup

12. 1.Which of the following would an administrator use to migrate virtual machines from on premises to the cloud?

laaS

SaaS

DBaaS

DRaaS

13. Which of the following standards supports MIMO technology?

802.11a

802.11b

802.11g

802.11n

14. Which of the following components enables the input on a mobile device's touch screen?

OLED

Digitizer

Inverter

CMOS sensor

15. A Microsoft Windows user is preparing to work in another country and needs to comply with corporate policy for data protection when copying files to portable media.

Which of the following solutions would MOST likely satisfy this requirement?

A USB 3.1 flash drive with BitLocker to Go installed

An SD memory card with NTFS

An xD memory card with ext3

A portable hard drive with FAT32

16. An organization maintains various record types, including health and criminal justice records.

Which of the following cloud environments is the organization MOST likely to use to limit the attack surface?

Public

Hybrid

Community

Private

17. An online retailer would like to add capacity to support increased sales. Additional servers have been installed.

Which of the following should be used to ensure each new server is being properly utilized?

Virtualization

Clustering

Load balancer

Round-robin DNS

18. A technician replaced a motherboard on a server, and now the 64-bit hypervisor is not loading correctly.

Which of the following needs to be enabled for the hypervisor to run?

Hardware prefetcher

Hyperthreading

vPro

VT-d

19. A technician is configuring a workstation to be used as a VM host. After installing the necessary software, the technician is unable to create any VMs.

Which of the following actions should be performed?

Disable the BIOS password.

Enable TP

Enable multithreading.

Enable Fast Startup.

20. A user on a SOHO network is unable to watch online videos, even at 240 pixels.

The technician runs ipconfig from the user's computer and records the following:

The technician then connects a test laptop to the router via the user's Cat 5 cable and records the following information:

Which of the following is MOST likely causing the user's issue?

Incorrect IP address

Faulty NIC

Misconfigured default gateway

Bad network cable

Page 3 of 3

21. A user acquired a new workstation and is attempting to open multiple targe Excel files simultaneously. The user is not experiencing the expected performance when executing such large requests.

Which of the following should a technician do FIRST?

Increase the swap partition.

Upgrade the CPU in the workstation.

Upgrade the power supply in the workstation.

Upgrade the RAM in the workstation.

22. A user submitted a ticket to report an issue with a new printer that is no longer accepting new print jobs.

The technician verifies the printer is on and notices the printer LCD screen has the following error message:

Paper Jam, Jam in fuser.

Which of the following is the MOST efficient next step the technician should complete?

Apply a maintenance kit to the printer

Check the printer paper path to locate any obstructions.

Turn the printer on and off to see if the error clears.

Replace the fuser.

23. A user connects a smartphone to a laptop.

Which of the following types of networks has the user created?

PAN

MAN

WLAN

LAN

24. A user requested upgrades to a company-Issued laptop to increase its performance while working with a large database stored on drive C.

Which of the following tasks should a systems administrator complete to BEST meet this goal? (Select TWO).

Configure RAID 1.

Install a hybrid drive.

Upgrade to 1GB NI

Increase the RA

Migrate to a SS

Upgrade the power supply.

25. Which of the following technologies can allow multiple networks to traverse a switch?

VLAN

VRRP

VPN

DHCP

26. A technician is setting up a new desktop computer and will be installing the hard drive directly on the motherboard without using cables to connect it.

Which of the following will the technician be installing?

Thunderbolt

eSATA

SCSI

27. Which of the following utilizes TCP ports 20/21 and transfers data in cleartext?

SNMP

SSH

FTP

Telnet

28. A technician installed a Cat 5 UTP cable approximately 275ft (84m) from a network switch in an office to a workstation located on a factory floor. The technician sees both a flashing green LED and a flashing orange LED on the workstation's NIC.

Which of the following should the technician do FIRST?

Check for loose connections, pinched bends, and physical damage.

Install a powered hub as close as possible to the halfway point in the Cat 5 UTP cable run.

Replace the entire run of Cat 5 UTP cable with Cat 5 STP cable.

Upgrade the entire cable run to multimode fiber.

29. A user reports that printed receipts have black smudges over the entire image. The text is still present but is very dark and sometimes illegible.

Which of the following are the MOST likely cause and solution for the printer issue?

The ribbon is jammed and is rubbing on the paper. Clear the bad ribbon and feed it through properly.

The printhead is too hot. Adjust the temperature down and retry printing.

The printer is loaded with the wrong type of paper. Replace the receipt paper with carbon paper.

The blue ink cartridge was loaded with black ink. Put in the correct ink and clean the printhead.

30. Several users who share a multifunction printer in an office have reported unintended, thin, vertical lines that cover the entire height of every page printed from the printer.

Which of the following steps should a technician complete in order to MOST likely resolve this issue?

Replace the printer paper with a new ream.

Clear the print spooler on each computer.

Reinstall the printer driver on each computer

Perform the drum-cleaning procedure.

Check 220-1101 Free Exam Dumps Questions – Find Best CompTIA A+ 220-1101 Exam Dumps

Check 220-1101 Free Exam Dumps Questions – Find Best CompTIA A+ 220-1101 Exam Dumps

Share this post

Author

Related Posts