OmniStudio Developer Dumps Online - Check Free OmniStudio Developer Dumps Demo First

OmniStudio Developer Dumps Online – Check Free OmniStudio Developer Dumps Demo First

Eleanor2024-10-14T15:27:28+00:00

By Eleanor Salesforce, Salesforce Developer

Salesforce OmniStudio Developer credetial is one hot Salesforce certification, which is intended for individuals who have knowledge, skills, and experience developing cloud applications using OmniStudio declarative development tools. When preparing for this OmniStudio Developer exam, you can have the OmniStudio Developer dumps online of ITPrepare to be your good study materials. You may also check free OmniStudio Developer dumps demo first before the actual Salesforce Certified OmniStudio Developer exam dumps preparation.

Page 1 of 3

1. Refer to the exhibit below .

What is the marge code needed for this integration procedure structure to pass a CaseNumber node from the DRReadCase DataRaptor Extract Action to the HTTP Action’s HTTP URL?

%DRReadCase: CaseNumber%

((DRRCase, CaseNumber))

MTTOPDetCaseDetail: CaseNumber%

((CaseNumber))

2. A developer has a requirement to create a child FlexCard that contains all of its parent FlexCard’s records In a Datable How should the developer configure the parent FlexCard’s Node?

{Records{0}}

{Records}

{Params, records}

{Recorded}

3. A customer sets up two LWC OmniScripts, one embedded into another. AccountId is set in a Set Values element in the parent OmniScript. The Accountid set in the parent OmniScript is used to set another Set values element ContextAccountId in the emvedded OmniScript. The embedded OmniScript is activated.

While previewing the OmniScript flow from the parent, it is found that Account I set correct in the parent OmniScript. However ContextAccount in the embedded OmniScript is not set with the Accountid from parent OmniScript. On previewing the embedded OmniScript individually. It is found that ContextAccountId is set correctly.

What is the reason for this? Refer to the exhibit below.

The WLC PubSub Messge flag in the Set Values action of the parent OmniScript has not been set.

The flag passData.JSON in the parent OmniScript in not configured correctly.

A developer failed to include a Navigate Action Element to pass data from the parent OmniScript.

Both parent and embedded OmniScripts have the same element name for the Set Values element.

4. A developer is configuring a DataRaptor Load to Save contract data. The developer needs to set the record type of the contact using DeveloperName.

Which two configuration actions should the developer take to set this up in the DataRaptor Load?

Check is Lookup property when mapping the fields.

Add Link to RecordType object in the Contact Object with the id field of RecordType object.

Select RecordType in the Lookup object list. Development in the lookup Field list, and ID in the Lookup Requested Field list.

Select RecordType in the Lookup Object list. ID in the Lookup Field list, and Development in the Lookup requested Field list.

5. Refer to the exhibit.

All inputs to the Calculation Matric are set correctly.

The Calculation Matrix has the following input:

What is the output?

Null

13.99

12.99,13.99

12.99

6. Refer to the exhibit below.

In this Integration Procedure structure, what Send JSON Path would you use to send the output of the ActionZ element to a Response Action?

Block

BlockYActionZ

ActionZ:BlockY:BlockX

BlockX:BlockY:ActionAZ

7. Which two in an integration Procedure or DataRaptor can execute a function like CONCAT or DATEDIFF? Choose 2 answers

In a Set Values Action in a Value field.

In a DataRaptor in an Output Tab Output JSON Path.

In a DataRaptor Action in an Input Parameters value field.

In a Remote Action m an Additional Output value field.

8. In an OmnoScript, a developer needs to configure a Disclosure element to require user input only if the user already checked a Non-Disclosure Agreement Checkbox.

How should the developer configure the conditional view to meet this requirement?

Show element if true

Disable read only if true

Set element to optional if false

Set element to require if true

9. Refer to the exhibit.

A developer creates an OmniScript display FirstName, LastName, and BirthDate of a contact using a Type Ahead Block. The DataRaptor used in the Type Ahead has been tested and fetches the correct data.

When previewing Omniscript, the developer enters a name in the Type Ahead and makes a selection of a contact from the list. However, the text fields FirstName. LastName, and BirthDate are not getting populated with the data.

What is the reason that the fields fail to display the fetched data?

Lookup Mode is not selected in the properties of the Type A Head Block.

Use Data JSON is not selected in the properties of the Type Ahead Block.

FirstName, LastName, and BirthDate are not placed inside the Type ahead Block.

The Typeghead ley is not in the correct format

10. Refer to the following row-versioned calculation matrix.

The developer needs to delete the row that contains the Code CA-SF.

If the developer deletes that row in Version 3, what is the result?

The row is delete only in Version 3.

The row is deleted In Versions 2 and 3 but will remain in Version 1.

The row is deleted in Version 3 and Version 1.

The row is deleted in all versions

Page 2 of 3

11. A developer needs to display the following information together on one FlexCard:

* Account name, address, phone number, website

* Primary contact first name, contact name, address, phone number, email

The account information must always be visible, and the contact information should only be visible as needed by the user.

What approach should the developer use to display the contact information on the card?

Use a Datatable element

Set the class’’ collapsible’’ on the block element

Set the collapsible property on the block element

Use a conditional FlexCard State

12. An integration Procedure uses an HTTP action to make a REST API call. The response from the REST API must be converted into a specific XML structure before sending it as an input to another external wen service.

How should the developer configure the Integration Procedure to meet this requirement?

Use a Remote Action that calls the XMLStreamReader class

Use a Remote Action that calls the XMLStreamWriter class

Use a DataRaptor Transform to convert JSON to XML

Use a DataRaptor Extract and check the XML checkbox on the Output JSON Path.

13. An integration procedure contains a Remote Action element that calls a method of an APEX class. The method requires two fields are input: Accountid and ProductId. The integration Procedure data JSON contains the following nodes:

How should the Remote Action element be configured to pass the data correctly to the method?

Check the Send Only Additional Input checkbox, and the following/ value pairs to Additional input:

Set Return Only Additional Output to true, and add the following Key/Value pairs to additional input.

Check the DataRaptor Transform checkbox, and add the following Key/Value pairs to Output JSON Path:

Add the following to Send JSON Path: accountId: %Accountd% ProductId% Details Products%

14. A developer needs to build a multi-step intake form. Each step must allow the user to cancel the intake at any time. The developer is using an LWC OmniScript to build the form.

How should the developer implement the cancel functionality for all steps using the LWC OmniScript Designer?

Check the Enable Cancel checkbox in the Setup tab under Cancel Options.

Add a navigation Action inside each step and set the Component name to ‘’Cancel’’,

Add a navigation Action outside each step and set the Element Name to ‘’Cancel’’,

Add a navigation Action inside each step and set the Element Name to ‘’Cancel’’,

15. A developer is building an OmniScript and needs to save to Salesforce and to an AWS Order Management system.

Which OmniScript element could save all of this data?

DataRaptor Post Action

HTTP Action

Integration Procedure Action

DataRaptor Load Action

16. In a calculation procedure, what is required for the output of a calculation step to be used in an aggregation step?

It must be included in constants.

It must be a matrix lookup step.

It must be a calculation step.

It must be included m the calculation output.

17. 1.A developer is configuring an integration Procedure Action in an OmniScript. The Omniscript needs a JSON response from the Integration Procedure but does not need to wait for the response for the user to proceed.

Which feature should the developer enable?

Toast Completion

Use Future

Invoke Mode Fire and Forget

Invoke Mode Non-Blocking

18. A developer is creating a FlexCard for a new Community page. The FlexCard will display case information along with action to close the case and update the case. And it will be styled using the Community’s theme.

What must be developer do to configure the FlexCard for deployment in a Community?

Add the FlexCard’s API name to FlexCard Player component

Set the Target property in publish Options to Communitypage’’

Configure the Component visibility in the custom Component.

Set the Developer property in Card Configuration to ‘’Community’’

19. Refer to the exhibit below .

What is the merge code needed for this Integration Procedure structure to pass a CaseData node from the HTTP Action's output to the DataRaptor Transform Action?

%HTTPGetDetails:CaseData%

%DRXformCaseData: CaseData%

20. …… configure Additional input to send exactly the same data? Assume that the develop checked Send Only Additional input.

Option A

Option B

Option C

Option D

Page 3 of 3

21. A developer needs to configure a calculation procedure to calculation the sum of the entire Baseprice.

What is the most efficient way for the developer to meet this requirement?

Create a Postprocessor apex class to calculate the sum.

Add an Aggregation Step as SUM (BasePrice)

Add A Calculation Step as SUM (BasePrice).

Create a Preprocessor class to calculate the sum

22. A developer has a requirement to create a child FlexCard that contain all of its parent FlexCard’s records in a Datatable.

{Records[0]}

{Records}

{Params records}

{recordId}

23. What should a developer's first step be when troubleshooting whether a DataRaptor Extract is retrieving data?

Go to the Lightning Console and reload the page to test.

Go to the PREVIEW tab In OmniScript to test.

Deactivate the card and layout, and go to the PREVIEW tab for the card to test.

Add a key/value pair in the DataRaptor to test it.

24. Refer to the exhibit.

What JSON from the DRGetAccountDetails action would display all six values correctly in the OmniScript structure shown? BlkContacts is a Repeat Block.

A)

Option A

Option B

Option C

Option D

25. A developer has an existing DataRaptor Load that insert Contact records with inputs as LastName and firstName. The DataRaptor works as expected when previewed.

The developer creates an integration Procedure to test the DataRaptor and is using a SetValues element in the Integration Procedure to set the first name and last name for the contact record.

The DataRaptor and Integration Procedure are set up as shown in the exhibit below.

When the developer executes the Integration procedure in preview, the following error message displays: Required fields are missing: [last Name]’’,

How should the developer address this issue?

SetValuesContactDetails should have been added to Additional input of DataRaptor Post Action in Integration Procedure

The Set values Action Keys should include the DataRaptor Post Action element name path, e,g LoadContactDetails, lastname

The DataRaptor Post Action in the integration procedure should have been executed before the Set Values Action

The valid field names should be added in the Domain object field in the DataRaptor

OmniStudio Developer Dumps Online – Check Free OmniStudio Developer Dumps Demo First

OmniStudio Developer Dumps Online – Check Free OmniStudio Developer Dumps Demo First

Share this post

Author

Related Posts