Choose VMCE2021 Exam Dumps To Prepare For the Veeam Certified Engineer 2021 Certification

Eleanor2024-10-14T15:10:39+00:00

By Eleanor VEEAM, Veeam Certified Engineer (VMCE)

Are you preparing for the Veeam Certified Engineer 2021 certification? Then you can choose our VMCE2021 exam dumps to prepare for the exam well. Our updated VMCE2021 exam dumps are the perfect solution to help you prepare and pass the certification. With our updated VMCE2021 dumps V9.02, you will get 142 practice exam questions and answers to help you study and get ready for your exam. Don’t miss out on this great opportunity to get certified!

Try to read the free demo of the updated VMCE2021 exam dumps:

Page 1 of 5

1. If you need to run a script to stop a service in order to get an application-consistent backup on a Windows server, where can the script be run?

In the guest processing setting of the job, enable application-aware processing and add a pre-freeze script to the VM

Configure the script to run on the Veeam Backup & Replication server using the Windows Task Scheduler

Copy the script to the VM and schedule the script to run prior to the start of the backup job using the Windows Task Scheduler in the VM

In the virtual machines setting of the job, add a script in the scripts tab under “Run the following script before the job:”

2. Which of the following predefined tests can be performed during a SureBackup verification test on a backup file? (Choose three.)

Application test

Heartbeat test

Ping test

SAN check

Boot time

OS test

3. An infrastructure with 50 VMs has a power outage. After the VMware cluster has booted up again, 10 medium-sized VMs have corrupted VM disk files.

Which action can be used to restore the VMs back to the production state?

Use the "Restore guest files" option and restore all VM Files.

Perform Restore VM Files and only restore the VM configuration files.

Perform Restore VM Files and restore the VM configuration and disk files.

Perform Instant VM Recovery with quick rollback.

4. A physical Linux server protected by a centrally managed Veeam agent is physically damaged. A VMware vSphere infrastructure is available, and the physical server is eligible for virtualization.

Which recovery step provides the lowest possible RTO?

Use Instant VM Recovery to VMware vSphere.

Use Instant Disk Recovery to VMware vSphere.

Use Export Disk Content as Virtual Disk to create a new V

Use Bare Metal Restore to VMware vSphere V

5. What is Veeam vPower NFS Service used for?

It is used to send data to the original location or to a new location specified by the user when restoring It.

It allows Veeam Backup & Replication to present VM files in a native format to an ESXi host, from a compressed and deduplicated backup file.

It is used to mount a compressed and deduplicated backup file directly to the backup server and perform file and item level restore.

It continuously checks the configuration settings of jobs and starts them in accordance with their schedules.

6. A backup job is configured as follows.

How many full and incremental restore points will be in a repository on day 16 at 23:00?

3 full and 14 incremental

2 full and 12 incremental

3 full and 15 incremental

1 full and 13 incremental

7. In the war against ransomware, a company decided to implement tape backup for the first time. The tape library has already been added. Of the following, what must be done first?

Create vaults.

Create media pools.

Create libraries.

Create media sets.

8. An administrator accidentally deleted a database. Veeam Explorer for Oracle will be used to restore it back.

What is the fastest option to get the database online again?

Use the "Compare with Production" option to restore only the missing objects back to the Oracle database.

Use the "Point in Time" option to specify the point in time you want to restore the Oracle database to.

Use the "Quick Rollback" option to perform a restore of the changed blocks of the Oracle database file.

Use the "Instant Recovery" option and restore it in the background.

9. A critical server in a Hyper-V environment has crashed and will not reboot.

What is the fastest way to bring this server back online so employees can continue to work?

Instant VM Disk Recovery

Entire VM restore

Instant VM Recovery

Staged restore

10. A planned failover of three VMs has just completed successfully, starting the VMs at the disaster recovery location.

What next actions are available for the failover plan?

Undo, Start, Copy, Delete

Cancel, Start, Edit, Delete

Cancel, Start, Copy, Delete

Undo, Start, Edit, Delete

Page 2 of 5

11. A company needs several VMware thick provisioned VMs restored. The physical proxies used for restoration have access to the Fibre Channel datastores used by VMware.

Which transport mode will be used by default to restore these VMs?

Network mode

Virtual appliance

Quick Migration

Direct Storage Access

12. What data sources can be connected to Veeam ONE? (Choose two.)

Veeam Backup & Replication servers

Microsoft Hyper-V servers

Veeam Backup & Replication agents

Microsoft Azure VMs

Amazon Web Services EC2 instances

13. For general data protection regulation (GDPR) compliance, Veeam can add a location tag to which component?

Guest interaction proxies

vCenter servers

Cloud gateways

WAN accelerators

14. Veeam Backup & Replication is currently configured to back up different workloads: Windows VMs on vSphere and Linux VMs on vSphere. A secondary copy of all the backups including transaction logs must be created.

Which of the following backup copy job configurations is the simplest?

A single "periodic copy" backup copy job

A single "immediate copy" backup copy job

Two "immediate copy" backup copy jobs

Two "periodic copy" backup copy jobs

15. Which of the following is NOT an advantage of Veeam ONE Monitor?

Built in phone home function for better security

Updates are signature based

Automatic problem mediation

Manual or scheduled log analytics

16. If the deduplication setting are changed for an existing job, when will the new setting be applied?

At the next run of the job

If any kind of full backup is created

If a new active full backup Is created

Only when you rescan the repository that stores the backup files

17. An administrator is asked to change a backup copy job from periodic mode to immediate mode.

How can this be accomplished?

Edit the original job and select immediate copy mode from the job settings.

Enable immediate mode on the repository.

Create a new copy job and delete the original job.

Modify the job settings on the proxy performing the copy job.

18. A Scale-out Backup Repository with one local extent has been configured as follows.

12 VMware VMs are being backed up daily by a forward incremental backup job, which has a 31-day retention, creating synthetic fulls on Saturdays.

After running for more than 31 days, which of the following would be accurate?

Both the performance tier and capacity tier will contain all restore points.

The performance tier will contain all restore points. The capacity tier will contain zero restore points.

The performance tier will contain the most recent 15 to 22 days of restore points. The capacity tier will contain the oldest 14 days of restore points.

The performance tier will contain the most recent 14 to 20 days of restore points. The capacity tier will contain all restore points.

19. Backup jobs are configured to local repositories. Backups must be sent from Site B to the repository on Site A. The connection allows direct backups to complete within the backup window. Impact on the source VMs at Site B should be minimized.

Which type of job and Veeam components should be used to provide the necessary protection?

A backup copy job and components 6 5 4 3 2

A backup job and components 5 2

A backup copy job and components 6 2

A backup copy job and components 6 4 2

20. 1.A daily backup job for seven Hyper-V VMs has been configured at the main site, keeping 14 days’ worth of backup files. They want to get a copy of the VM backups to a repository at the disaster recovery site. They want to keep six months’ worth of backup files at the disaster recovery site. They also need to be able to restore the VMs to any given day within two months and any given week within six months.

How should a backup copy job be configured to meet these requirements?

Use periodic copy (pruning) mode, keeping 180 days of retention.

Use immediate copy (mirroring) mode, keeping 62 days of retention and 26 weekly GFS restore points.

Use periodic copy (pruning) mode, keeping 62 days of retention and six monthly GFS restore points.

Use immediate copy (mirroring) mode, keeping 180 days of retention.

Page 3 of 5

21. Which feature can be used in Veeam Explorer for Oracle database?

Recover from litigation and in-place hold items

Restore original password for account objects

Restore databases from backups created with Veeam RMAN plug-in

Export to .BAK file

22. Veeam ONE has been installed and configured. The infrastructure contains five Veeam Backup & Replication servers.

The administrator needs to check the remaining capacity on each of the backup repository servers. Where can they see this information?

Under Infrastructure View, look up the Veeam Backup & Replication servers to see the guest disk space.

Under Data Protection View, look up the backup repository servers to see the remaining capacity.

Under Business View, look up the backup repository servers to see the remaining capacity.

Under Infrastructure View, look up the backup repository servers to see the guest disk space.

23. A physical Linux file server needs to be migrated to VMware ESXi.

The server has several volumes: /dev/sda (60GB), /dev/sdb (1TB) and /dev/sdc (4TB).

What is the quickest option to migrate the server?

Export all disks, create an empty VM and attach the disks.

Create an empty VM and perform bare metal recovery inside the V

Perform Instant VM Recovery.

Perform Instant Disk Recovery for each volume.

24. A Veeam administrator is creating a protection group that needs to back up all servers for the accounting department using Veeam Agent for Microsoft Windows. New accounting servers must be automatically added to the protection group.

How is this accomplished?

Create a protection group that reads a .csv file listing the accounting servers.

Create a protection group and set it to automatically scan every three hours for new servers.

Install a configuration file on each of the accounting servers that adds it to the protection group.

Create an Active Directory based protection group targeted at an Active Directory security group.

25. 15 VMs are running on a Hyper-V platform and five physical servers at a remote office (ROBO). The administrator has been tasked with setting up centralized off-site backups at the headquarters (HQ). The available bandwidth is 50 Mbps. RPO is set to six hours and the data generated for the interval is 500 GB. WAN accelerators can be added if necessary.

Which of the following will achieve the RPO?

Use backup copy jobs in with High-Performance Mode enabled. Set the schedule to run every six hours.

Use backup copy jobs with copy mode set to "immediate copy". Use WAN acceleration.

Use backup copy jobs with copy mode set to "periodic copy" and copy every six hours.

Configure the backup copy jobs with traffic throttling to 30 Mbps to limit the impact. Enable WAN acceleration.

26. Due to an unexpected power outage, Site A is completely down. The disaster recovery strategy was implemented (see diagram).

What is the correct way to start replicated VMs on Site B, while ensuring you can failback after Site A comes back online?

Execute "Permanent failover" from vCenter.

Execute "Planned failover".

Power on VMs manually through vCenter.

Perform "Failover".

27. A file on a Windows VM hosted on vSphere is corrupted and must be restored. VMware tools are installed and up to date on the VM. For some reason, the Veeam mount server cannot connect to the VM through the network.

Which of the following restore methods provides the fastest restore (RTO)?

Run Veeam file restore wizard and let it restore through VI

Start an Instant VM Recovery session and log on into the restored image to copy/paste the file to restore.

It is impossible to restore the file on the VM if the mount server cannot reach it through the network.

Run Veeam file restore wizard and use the "copy to" to download the file locally in a shared folder.

28. An administrator needs to configure a backup job that dynamically adds new VMware hosted SQL servers.

How can this be accomplished?

Create a dynamic backup job in Enterprise Manager.

Create a job based on vSphere tags.

Create a CSV file that is scanned before the backup job starts.

Enable application aware processing.

29. After performing a failover to a disaster recovery site, it is decided that the VMs need to be failed back to the original production site and that any changes made during the failover should be discarded.

Which option should be used?

Undo failover

Undo failback

Failback

Commit failback

30. A Veeam administrator is concerned about keeping backups on site and has traditionally used tapes to store backups older than 30 days in order to free up space on their backup repository for longer-term storage. The company is currently using Scale-out Backup Repositories.

What option would satisfy the requirement?

Copy to capacity tier

Move to capacity tier

Backup to object storage

File copy job

Page 4 of 5

31. A backup administrator has replicated a virtual machine between two Hyper-V hosts and now would like to automatically verify the recoverability of the replica.

What would they need to do?

It is not supported to perform SureBackup replica testing for Hyper-V

Create a virtual switch with no uplinks and start the virtual machine connected to the new switch

Create a virtual lab and an application group; create a SureBackup for the replica job and run it once a day

Start the virtual machine manually using the universal application item recovery wizard

32. What does Veeam's Secure Restore functionality ensure during restores?

256-bit AES encryption of in-flight data

Anti-virus scanning

Custom ports for in-flight data

Proper rights/permissions on files and folders

33. Which HPE SAN storage systems are supported by the Backup from Storage Snapshots feature in Veeam Backup & Replication? Choose three options.

HPE StoreVirtual and StoreVirtual VSA

HPE Nimble Storage AF-series and CS-series

HPE StoreEasy Storage

HPE 3PAR StoreServ

HPE StoreOnce

34. A backup administrator decided to move the Veeam Backup & Replication server and configuration database to new servers.

Which configuration restore mode should be used?

Migrate

Planned failover

Restore

Failover plan

35. An administrator has decided to set up a VM backup job covering their Microsoft SOL servers.

What feature must be enabled to ensure quiescence of the SQL databases during the backup?

Enable Microsoft SQL server plug-in.

Enable application-aware processing.

Enable Microsoft Windows OS processing.

Enable Microsoft SQL server agent on the VMs

36. What is necessary prior to configuring replica mapping?

A Veeam backup in the production site

A Veeam replica in the disaster recovery site

A Veeam backup in the disaster recovery site

A Veeam replica in the production site

37. At 18:00, after a Windows update installation, a VM is stuck in an infinite boot loop. The VM is configured as follows.

The last backup was created at 01:00. Choose the recovery approach that provides the lowest RTO with the least data loss.

Instant VM Recovery with quick rollback

Instant VM Recovery

VM disk recovery with quick rollback of Disk 1

Virtual disk restore of Disk 1

38. Veeam Agent for Linux has been installed in standalone mode on a Linux physical server. The backup job is configured to write to a Veeam repository.

Which of the following media types is available as a recovery media?

ISO image

Veeam Backup & Replication repository

Object storage

Tape

39. Which of these repository types CANNOT be an extent of a scale-out backup respository? Choose two options.

A deduplicating storage appliance

A Windows server

A Cloud Connect cloud repository

A shared folder (CIFS/SMB share)

Another scale out repository

A Linux Server

40. A company needs to recover a VM from VMware very quickly. The company decides to use Instant VM Recovery from their last backup.

What platforms can this backup be instantly restored to? (Choose three.)

Azure

Hyper-V

AWS

GCP

AHV

VMware

Page 5 of 5

41. A Windows VM running on Microsoft Hyper-V is protected using the file indexing option. The guest interaction proxy is offline.

Which of the following Veeam servers will be used to deploy the runtime during the backup process?

Backup & Replication server

Indexing database server

File proxy server

Virtual lab server

42. A director has asked for a quarterly report for capacity planning purposes.

Which Veeam component should be used?

Veeam Backup & Replication Console

Enterprise Manager

Business View

Veeam ONE Web Client

43. Which of the following are valid export options for Microsoft SQL Server items when using the Veeam Explorer for Microsoft SQL? (Choose two.)

.mdb file

.bak file

.mdf file

.sql file

.xls file

44. In Veeam Enterprise Manager, what granular restoration permission can be set for the Restore Operator role?

SharePoint items

File items

Active Directory items

OneDrive items

45. Which of the following backup types are valid for both Veeam Agent for Microsoft Windows and Veeam Agent for Linux? (Choose two.)

Snapshot-level backup

File-level backup

Personal files backup

Volume-level backup

OS-level backup

46. A director in a business needs a folder of traffic photos restored from a Linux server. This machine sits on a VM backed up by Veeam Backup & Replication. The director wants the files restored to their original location and does not want to lose the original files.

What functionality will be used to restore the folder using the Veeam Guest OS restoration wizard?

Restore the files using the "Versioning" function. Files will be prefixed with numbers (1-, 2-, 3-, etc.).

Restore the files using the "Overwrite" function. Original files will be renamed.

Restore the files using the "Hold" function. The director can then determine the status of the original and restored files.

Restore the files using the "Keep" function. Original files will be untouched

47. What is the default suffix added to a replica's VM name?

_secondary

_replica

_map

_seed

48. A Scale-out Backup Repository with one local extent has been configured as follows.

A daily VMware backup job retention is 31 days, keeping weekly GFS full backups for 14 weeks.

It is Jan. 20. A file from a backup that occurred on Jan. 1 must be recovered.

Where is the data?

The archive tier

The performance tier and the capacity tier

The performance tier

The capacity tier

49. Veeam ONE ______________________ can detect when a potential ransomware attack is happening and be configured to take mitigating actions.

Reporting

Alert Management

Alarm Management

Data Protection View

50. A Veeam proxy server is configured as follows. No modifications are allowed to the transport mode.

When performing a restore of a thin-provisioned VMware virtual disk on an NFS data store using this proxy server, what transport mode will be used by default?

Direct SAN access

Virtual appliance

Network

Direct NFS access

Choose VMCE2021 Exam Dumps To Prepare For the Veeam Certified Engineer 2021 Certification

Choose VMCE2021 Exam Dumps To Prepare For the Veeam Certified Engineer 2021 Certification

Try to read the free demo of the updated VMCE2021 exam dumps:

Share this post

Author

Related Posts