Great HPE2-T37 Dumps Online - HPE Product Certified - OneView [2022]

Great HPE2-T37 Dumps Online – HPE Product Certified – OneView [2022]

Eleanor2024-10-14T15:44:54+00:00

By Eleanor HPE, HPE Product Certified - OneView [2022]

For individuals, they are encouraged to pass HPE2-T37 Using HPE OneView exam to earn HPE Product Certified – OneView [2022] certification. It validates that they can describe, recommend, demonstrate, and configure HPE OneView converged infrastructure management solutions, then their resumes will be greater than others. To pass HPE2-T37 exam successfully, great HPE2-T37 dumps online are your good preparation materials. Practice HPE2-T37 dumps questions and answers to prepare for HPE2-T37 Using HPE OneView exam well.

Below are HPE2-T37 free dumps for helping you practice HPE2-T37 exam questions online.

Page 1 of 2

1. Your customer is considering HPE Synergy as a hardware platform for visualization workload. The customer environment is wry dynamic, and they often have to modify hypervisor networking.

Which resource provided by HPE should you discuss with this customer?

HPE OneView Global Dashboard allows server profile replication and change management.

PowerShell Library for HPE OneView allows scripted environment modification.

HPE OneView for VMware vCenter Server will enable host profile functionality and simplify changes.

HPE Image Streamer provides templates which can be updated to map the hypervisor requirements

2. Your customer wants to manage their HPE Superdome Flex using HPE OneView.

Which component must be added to HPE OneView to accomplish this task?

Baseboard Management Controller (BMC)

Rack Management Controller (RMC)

all nPARs created within the complex

only the base chassis from the complex

3. You want to put two FlexNlCs into a single Link Aggregation Group within a server profile.

What Is a prerequisite for this setup?

The sFlow option must be enabled and configured.

Both FlexNlCs must be connected to the same network.

The Compute Module profile must have exactly two connections defined.

An upgrade license must be purchased and deployed.

4. HOTSPOT

Click the option from the HPE OneView main menu that will allow you to define UPS or other components that will work as a placeholder in a rack system.

5. You ate implementing an HPE Synergy solution with multiple frames in one management ring. Image Streamer is not a part of this solution.

How can an IPv4 address pool defined by the administrator be used In HPE OneView?

to provide static IP addresses to IL0 and interconnect modules if applicable

to provide static IP addresses for an operating system running on a Compute Module

to provide static IP addresses for Logical Interconnects and Logical Enclosures

to provide static IP addresses for storage systems managed in HPE OneView

6. DRAG DROP

For HPE Primera, match each task with the management tool that can be used to perform it.

7. Refer to the exhibit.

Which statement about the logical interconnect shown is true?

For FC uplink sets, an additional uplink from second module should be added for redundancy.

The maximum supported number of the internal networks for logical interconnect is configured.

Additional uplink ports can be added to ETH-Uplink to increase available bandwidth.

FC uplinks are not supported and will be converted to FCoE or RoCE uplinks.

8. A customer has to deploy 21 HPE Synergy Compute Modules in a boot from SAN setup.

How this task can be simplified while keeping the profile consistent?

Boot volumes can be created on demand and defined in the server profile template.

Boot volumes can be prepared in advance and later presented as shared volumes to the Compute Modules.

An existing volume can be replicated automatically when creating a server profile.

single SAN volume can be created and utilized by all HPE Synergy Compute Modules.

9. What is required to add remote frame link topology to HPE OneView?

The HPE OneView certificate from the primary site must be added to HPE OneView in the remote site.

The IP address assigned to HPE Composer installed in a remote site must be registered in a primary site.

Multi-site licenses must be added to HPE OneView and activate for all available HPE Synergy frames.

Management ports of the remote frame link topology must be connected to the management LA

10. Which statement about RoCE network restrictions is true?

RoCE networks require Virtual Connect SE 32Gb FC Modules.

RoCE networks cannot be configured when Virtual Connect modules are used.

RoCE networks are supported only when PVLANs are enabled.

RoCE networks are not supported with HPE BladeSystem

Page 2 of 2

11. You want to add the latest IL0 firmware to an HPE OneView firmware repository.

How can you complete this task?

A PowerShell script must be used to upload IL0 firmware to the Internal or external firmware repository.

A custom SPP iso Image must be created with the new IL0 firmware version and uploaded to the repository.

An external repository must be created, because standalone components are supported only In an external repository.

ILO firmware can be marked as a hotnx and uploaded directly to the Internal or external firmware repository.

12. Your customer runs VMware ESXi on an HPE Synergy platform. The ESXi systems must have access to 50 VLANs initially. However, this is a dynamic environment, and more VLANs will be added in the future.

They want to add more networks for virtual machines, but they do not want to modify the HPE Virtual Connect configuration.

Which type of the network should the customer define?

Untagged

Internal

Tunnel

Tagged

13. You originally configured boot mode for HPE ProLiant Gen10 server to ‘Legacy BIOS’ in an HPE OneView server profile and deployed an operating system. A few weeks later, you change the boot mode to the ‘UEFI optimized’ to leverage some features provided by this mode.

What must you do next?

reset an il_0 management processor to activate the new boot mode for the server

reinstall an operating system, as UEFI is using different drive format than Legacy BIOS

reset BIOS settings to the defaults so UEFI settings can be applied

reset BIOS settings to the defaults through the server profile after changing the boot mode

14. Your customer wants to use HPE OneView for VMware vCenter Server to simplify management of their VMware cluster running on HPE Synergy. The customer is concerned with the cost of additional licenses.

How will you explain licensing rules for this product?

As long as the customer has HPE OneVtew Global Dashboard deployed, HPE OneView for VMware vCenter Server does not require any additional licenses.

One HPE OneView for VMware vCenter Server license is required per HPE Synergy frame if more than 10 Compute Modules are installed in the frame.

If the number of the HPE Synergy Compute Modules installed in HPE Synergy frame is less than 10, no license is required to use HPE OneView tor VMware vCenter Server.

As long as the server is managed using HPE OneView. the customer can use HPE OneView for VMware vCenter Server without additional licenses.

15. After replacing a failed Compute Module, you notice the server profile Is not automatically

assigned to the replaced server hardware.

What can cause this issue?

IL0 firmware of the replacement server is different than firmware in broken server.

Server profile affinity is configured to Device Day + server hardware.

The enclosure group has to be updated to match the original enclosure group.

The replacement server has more memory or CPUs than broken machine.

16. Which action is allowed on storage pools managed by HPE OneView?

Volume provisioning

Setting storage pool replication

Changing storage pool RAID level

Changing storage pool capacity

17. Your customer plans to use HPE OneView to manage a small environment based on HPE ProLiant servers that includes G7 and Gen 10 systems.

What should you explain to this customer?

HPE Management Agent must he installed for HPE ProLiant Gen 10 servers.

HPE ProLiant G7 and Gen10 cannot be managed using the same appliance.

Not all of the features will be available for HPE ProLiant G7 systems.

HPE ProLiant Gen 10 servers do not need an HPE OneView license.

18. HOTSPOT

Click option that will allow you to select a FlexNIC function for the specified connection.

19. What step must be taken to add an HPE SuperDome Flex to an existing OneView environment

A Rack Management Controller must be added to HPE OneView.

HPE Superdome Flex can be added to HPE OneView after at least one nPAR is created.

Each HPE Superdome Flex chassis must be added Individually using BMC I

HPE Superdome Flex complex can be added by adding base chassis of this complex.

20. Refer to the exhibit.

You discovered that one of the profiles is not compliant with the server profile template.

What could cause this profile to be inconsistent with the server profile template?

The server was powered off or rebooted recently and IL0 did not reconnect to HPE OneView.

HPE OneView was restored from a backup that created inconsistency with the server profile template.

Network connectivity for HPE Synergy Compute Module was changed outside HPE OneView.

Changes to the server profile were implemented directly on the server profile.

Comment (1)

Updated Using HPE OneView HPE2-T37 Exam Dumps - Accurate Dumps For Preparation - ITPrepare

[…] may have read the great HPE2-T37 dumps questions of ITPrepare. It must be clear that the HPE2-T37 exam dumps have been updated with accurate dumps questions and […]

May 5, 2022 at 9:22 am

Comments are closed.

Great HPE2-T37 Dumps Online – HPE Product Certified – OneView [2022]