Updated 5V0-22.21 Practice Questions To Help You Achieve VMware Certified Specialist - vSAN 2022 Certification

Updated 5V0-22.21 Practice Questions To Help You Achieve VMware Certified Specialist – vSAN 2022 Certification

Eleanor2024-10-14T15:36:51+00:00

By Eleanor VMware, VMware Certified Specialist - vSAN 2022

You can choose the updated 5V0-22.21 practice questions to help yourselves achieve VMware Certified Specialist – vSAN 2022 certification. We know the VMware Certified Specialist – vSAN 2022 certification is to prove the candidates are able to install and configure vSAN. They are also capable of managing and monitoring a vSAN and performing basic troubleshooting and problem resolution. The most updated 5V0-22.21 practice questions with the correct answers of ITPrepare could be the best preparation materials for achieving VMware Certified Specialist – vSAN 2022 certification.

Check VMware Certified Specialist – vSAN 2022 5V0-22.21 Free Exam Questions

Page 1 of 3

1. Which Storage Policy Structure Rule is supported by vSAN Direct Datastore?

Enable tag/capacity-based placement rules

Enable host-based rules

Enable rules for vSAN storage

Enable storage performance-based rules

2. A vSAN administrator is tasked to perform an upgrade of a vSAN cluster from 7.0 to 7.0 U2, including firmware and drivers for its hardware. The vSAN administrator already created an image using vSphere Lifecycle Manager (vLCM).

Prior to selecting Start Remediation, which step should be taken to upgrade the complete vSAN cluster as a single task?

Select Remediate All through vLCM to upgrade all hosts in the cluster.

Manually remediate one host at a time in the vSAN cluster.

Place all hosts in the vSAN cluster into Maintenance Mode.

Stage the upgrade of the vSAN cluster through vLC

3. A vSAN administrator is using the vSAN ReadyNode Sizer to build a new environment. While entering the cluster configurations, a fellow colleagues inquire about the Operations Reserve option.

What is the purpose of using this option?

Configures space for external operations

Provides space for internal operations

Reserves space for tolerating failures

Allocates space forvSAN upgrades

4. A 5-node vSAN cluster contains multiple virtual machines, and a vSAN storage policy with the rule “Failures to tolerate” set to “1 failure - RAID-5 (Erasure Coding)” is assigned. A vSAN administrator has changed the rile in the assigned policy to “2 failures - RAID-6 (Erasure Coding)”.

What is the result of this change?

Changes are queued for 60 minutes.

The policy change is rejected immediately.

The updated policy is serially applied to the virtual machines.

No changes occur until the policy is reapplied.

5. After a recent data loss event, the IT department plans to deploy a DR site using vSphere Replication with vSAN providing the storage backend.

The architect would like to know how many components will be created based on the following configuration:

✑ 2x 100 GB VMDK

✑ RAID 1 vSAN Storage Policy

✑ 4x Point in Time snapshots

How many components will be created?

6. The DevOps team of an organization wants to deploy their new cloud native application with persistent storage on a dedicated vSAN cluster. The storage administrator is tasked to configure the vSAN cluster and leverage the vSAN Direct feature.

Which two requirements must the administrator meet to complete this task? (Choose two.)

Unclaimed disks in the hosts for vSAN Direct

A dedicated network for vSAN Direct

A valid vSAN license for the vSAN cluster

An integration with vSAN File Services

vSphere HA enabled on the vSAN cluster

7. Which option, if any, is the default option to enable Maintenance Mode on a vSAN host?

Ensure accessibility.

No data migration.

Full data migration.

There is no default option. The administrator must select an option.

8. A new host with local storage devices has been added to a vSAN cluster. Now, the administrator would like to increase the capacity of the vSAN datastore.

What must be done to the new host to accomplish this goal?

Configure a RAID set on the storage controller.

Create one or more disk groups.

Delete all existing partitions.

Perform a storage device rescan.

9. A host in the cluster experiences a permanent NIC failure, and the replacement part will not arrive until the next morning. The administrator needs to ensure the availability of the production workload at all times.

Which step should be taken by the administrator to meet this goal?

Shut down the production VMs.

Perform a live vMotion to another host.

Disable the vSAN Service on the VMkernel port.

Enter Maintenance Mode with 'Full Data Migration'

10. During yesterday’s business hours, a cache drive failed on one of the vSAN nodes. The administrator reached out to the manufacturer and received a replacement drive the following day. When the drive failed, vSAN started a resync to ensure the health of data, and all objects are showing a healthy and compliant state. The vSAN administrator needs to replace the failed cache drive.

Which set of steps should the vSAN administrator take?

Remove the existing vSAN disk group, and physically replace the device. Then, check to verity that the ESXi host automatically detects the new device. Afterwards, manually recreate the Disk Group.

Physically replace the failed cache device, and vSAN will automatically create a new disk group. Then, remove the disk group with the failed device.

Physically replace the failed cache device, and vSAN will automatically allocate the storage. Then, rebalance the cache layer.

Place the disk group into maintenance mode, and select Full Data Migration. Then, physically replace the failed cache device. Afterwards. vSAN will rebuild the disk group automatically.

Page 2 of 3

11. A vSAN administrator, who has a cluster that has both compute-only and vSAN ReadyNodes, recently received a request to deploy a new application with higher storage performance requirements than what are currently available.

What are two ways the administrator can reconfigure the vSAN cluster to obtain this additional performance? (Choose two.)

Add additional hosts, with capacity devices only, and then stream the cache from the other hosts.

Add cache and capacity devices to the compute-only hosts.

Add additional cache and capacity devices to the existing data nodes.

Add additional compute-only hosts from the vSAN cluster.

Add to the existing disk groups two cache devices and the eight capacity devices.

12. A vSAN administrator has a vSAN cluster that is using vSphere Lifecycle Manager (vLCM) to manage hypervisor, server drivers, and firmware. All hosts in the cluster are compliant according to the vLCM image.

A 10GB NIC on the servers is experiencing issues, the vSAN administrator determines a new network driver will resolve the problem. Unfortunately, the required NIC driver is a newer version compared to the driver provided by the most recent Vendor Addon.

Which action should the vSAN administrator take to ensure the latest network driver is installed on the NIC before remediation?

Add an individual component to the vLCM image that has the updated NIC driver.

Since server vendors release periodic server Vendor Addon updates, make sure the vLCM image is configured to use the most recent version of the vendor addon.

Modify the vLCM image to omit the NIC Driver, and then manually update the servers with the required NIC driver.

Remove the Vendor Addon from the vLCM image, and then manually install the network driver on the servers.

13. 1.A vSAN administrator wants to install a patch on an existing vSAN cluster. The environment runs vSphere 7.0, and the patch contains ESXi 7.0 Update 1c. The vSAN administrator will use vSphere Lifecycle Manager images to add the patch to the proper image and apply it to the vSAN cluster.

Which action should be performed before patching the ESXi hosts in the vSAN cluster?

Upgrade the Platform Services Controller.

Perform a disk format upgrade.

Create a baseline instead of using images.

Upgrade the vCenter Server.

14. Which tool should be used to identify vSAN unassociated objects?

vSphere Host Client

vSphere CLI

vsantop

PowerCLI

15. An existing vSAN cluster has this specification:

✑ Four ESXi hosts with all flash configuration

✑ Each with two disk groups

✑ Each disk group with one cache device and four capacity devices

✑ There are five more device slots available

The CTO would like to provision new applications, and these will need more capacity and performance.

Which two methods may be used by the vSAN administrator to meet this goal? (Choose two.)

Adding faster cache devices

Adding one more disk group per host with the same configuration

Replacing all cache devices by a larger device

Adding an ESXi host with identical device configuration

Replacing all capacity devices by a larger device

16. After a server power failure, the administrator noticed the scheduled resyncing in the cluster monitor displays objects to be resynchronized under the pending category.

What are these objects in this category?

These objects belong to virtual machines, which are powered off.

Object resynchronization must be started manually.

There are too may objects to be synchronized.

The delay timer has not expired.

17. A newly deployed vSAN cluster runs vSAN 7.0, and the vSAN cluster needs an integration with a third-party software solution. The software solution provides full app-level redundancy, and it runs on the vSAN Data Persistence platform.

The administrator configures vSAN Direct Configuration to integrate the third-party storage with vSAN and now needs to configure a storage policy to make sure the vSAN Direct storage is used by the vSAN Data Persistence platform third-party software solution.

Which type of storage policy configuration should the administrator use?

A storage policy with tag or capability-based rules for vSAN Direct

A storage policy with capability-based rules for third-party storage

A vSAN shared nothing policy with no data redundancy (FTT=0)

AvSAN storage policy with one failure to tolerate (N 1=1)

18. The objects on a 4-node vSAN cluster are assigned a RAID-5 policy. A network outage occurs, causing host one to lose connectivity with the rest of the cluster. Seventy-five minutes have elapsed.

What is the health state of the objects?

Reduced availability with no rebuild

Non-availability related incompliance (non-compliance)

Reduced availability

Reduced availability with no rebuild - delay timer

19. An administrator will be performing a rolling upgrade of a vSAN cluster over the weekend.

In preparation, the administrator runs the Data Migration Pre-Check.

Which two items are being checked? (Choose two.)

vSphere HA state

Object compliance and accessibility

DRS settings

Affinity rules

Cluster capacity

20. A customer is running a number of compute-intensive application workloads on their existing 4-node vSAN cluster that has resulted in resource contention. To provide additional compute resources, the vSAN administrator has decided to deploy a new 4-node vSAN compute-only cluster so that a HCI Mesh can be configured.

Which three points would the vSAN administrator need to consider before using this configuration? (Choose three.)

The storage policy must be based on the number of hosts within the client cluster.

The storage policy is based on the total number of hosts across both client and server clusters.

A storage policy of Erasure Coding with FTT=2 would be supported.

A storage policy of Mirroring with FIT 1 would be supported.

A storage policy of Erasure Coding with hi 1=1 would be supported.

The storage policy must be based on the number of hosts within the server cluster.

Page 3 of 3

21. An organization wants to configure a new storage policy based on the following requirements:

✑ Failures to tolerate = FTT 1/RAID-5 (Erasure Coding)

✑ Number of disk stripes per object = 8

✑ IOPS limit for object = 0

✑ Object Space Reservation = Thin provisioning

✑ Flash read cache reservation = 0%

✑ Disable object checksum = No

✑ Force provisioning = No

The administrator creates the policy using storage policy based management and assigns it to a 100GB virtual machine on a 4-node vSAN cluster to test the results of the new storage policy.

How many components will be created per host for the storage objects of the virtual machine on the vSAN datastore?

22. Which state is NOT a compliance status of a VM Storage Policy?

Compliant

Noncompliant

Stale

Not Applicable

23. A business unit requires proprietary data to be protected against a site failure while using the least amount of storage and the least amount of nodes. AN administrator plans to implement a vSAN Stretched Cluster with a RAID-5 policy.

What is the minimum number of data nodes across all sites in this vSAN Stretched Cluster configuration?

24. An administrator must choose between deploying a virtual witness or physical witness for a vSAN Stretched Cluster. The administrator eventually decides to use a virtual witness.

What is a benefit of selecting this approach?

Reduced vSphere licensing

Additional compute capacity for running VMs

Shared metadata between separate clusters

Increased vSAN datastore capacity

25. When viewing the VMware Skyline Health: vSAN Object Health report, the vSAN administrator observes that the link “Repair Objects Immediately” is enabled.

What is the meaning of this message?

One or more objects have absent components.

Immediate action must be taken to effect object repair.

One or more objects have become inaccessible.

The repair delay timer has elapsed, and ^synchronization has begun.

Updated 5V0-22.21 Practice Questions To Help You Achieve VMware Certified Specialist – vSAN 2022 Certification

Updated 5V0-22.21 Practice Questions To Help You Achieve VMware Certified Specialist – vSAN 2022 Certification

Check VMware Certified Specialist – vSAN 2022 5V0-22.21 Free Exam Questions

Share this post

Author

Related Posts