The Most Updated NS0-527 Exam Dumps [2022] For NetApp NCIE-DP Certification Exam

Eleanor2024-10-14T15:35:00+00:00

By Eleanor NetApp NCIE-DP, Network Appliance

The NS0-527 NetApp Certified Implementation Engineer, Data Protection certification exam is an important Network Appliance certification exam in the growing IT area. More and more students and candidates are eager to pass the NS0-527 exam for a successful career. The most updated NS0-527 exam dumps of ITPrepare are great, with the actual NS0-527 dumps questions and answers, you can pass the NetApp Certified Implementation Engineer, Data Protection (NetApp NCIE-DP) certification exam on the first try.

Before attending the NS0-527 exam with the help of NS0-527 exam dumps, you can read NS0-527 free dumps below:

Page 1 of 5

1. Which two NetApp technologies allow for synchronous replication of data between two remote sites? (Choose two.)

SyncMirror

SnapVault

Metro Cluster

SnapMirror

2. You decide to enable SnapMirror network compression on your NetApp clustered Data ONTAP environment.

Which two statements are correct about enabling this feature? (Choose two.)

The data is compressed only while it traverses the network.

The data transfer between the clusters must use the NDMP protocol.

You may only enable SnapMirror network compression on one HA pair in a cluster, and traffic 1-1 is limited to routing through those nodes.

The compression engine creates multiple transfer threads corresponding to the number of CPUs on the source storage system.

3. You want to configure peering between two existing ONTAP HA clusters.

In this scenario, which three steps would you perform to accomplish this task? (Choose three.)

Create a cluster peering relationship.

Create intracluster LIFs.

Create intercluster LIFs.

Create a SVM peeringrelationship.

Create iSCSI LIFs.

4. You want to ensure that you are using compatible hardware and software versions with your MetroCluster installation.

Which tool would accomplish this task?

Hardware Universe

System-Level Diagnostics tool (SLDIAG tool)

OneCollect

Interoperability Matrix Tool

5. A storage administrator is reviewing NAS volume spaceallocation and is concerned that the Snapshot copies that are recently created to protect the volumes are not storing the data from the volumes. One volume contains over 20 GB of data, although the latest SnapShot copy contains only 198 KB of data.

In this scenario, which statement is true?

ONTAP references metadata when creating Snapshot copies instead of copying data blocks.

The Snapshot policy is defined to create the Snapshot copy with only the most recent data changes.

ONTAP uses data from all Snapshot copies when restoring of the volume is necessary.

The Snapshot copies are created by using a background process that takes time to build.

6. A volume on a FabricPool-enabled aggregate is consuming 10 TB of the performance tier and 90 TB of the cloud tier. A SnapMirror copy needs to be created on a FabricPool-enabled peer cluster at a disaster recovery location.

In this scenario, how much data is transferred when the SnapMirror relationship is initialized?

100 TB

200 TB

10 TB

90 TB

7. Which two tools would you use toverify that an Oracle database has an application-consistent snapshot taken? (Choose two.)

SnapManager for Oracle

OnCommand System Manager

SnapCenter

OnCommand Unified Manager

8. A previous administrator had configured an external backup system to use node-scoped NDMP for backups, but you want to change this system to use SVM-scoped NDMP.

How do you make this change in ONTAP?

Turn off node-scoped NDMP on the SVMs being backed up.

Restart the NDMP service on the cluster.

Restart the NDMP service on the SVMs being backed up.

Turn off node-scoped NDMP on the cluster.

9. Click the Exhibit button.

Referring to the exhibit, what two Search Criteria check boxes need to be used to provide a supported solution for protecting Windows Server 2019 DCE 64-bit, x64 host using local NetApp LUNs with SnapCenter Server 4.1.1? (Choose two.)

SnapCenter Application Plugin

SnapCenter Host Plugin

Browser

Host OS (OS)

10. A customer has just purchased a new 2-node AFF A220 cluster running ONTAP 9.7 and moved the older 4- node FAS2650 cluster running ONTAP 9.5 to an off-site location. They want to configure replication to the FAS2650 cluster for both disaster recovery and long-term archiving.

In thisscenario, how would the customer accomplish this task?

Upgrade the FAS2650 cluster to ONTAP 9.7, then configure SnapMirror with type TD

Leave the ONTAP versions, then configure SnapMirror with type XD

Downgrade the AFF A220 cluster to ONTAP 9.5, then configure SnapMirror with type XD

Leave the ONTAP versions, then configure SnapMirror with type D

Page 2 of 5

11. A customer’s infrastructure consists of multiple ONTAP clusters, both physical and virtual. The clusters replicate some data with each other. You want to generate a comprehensive report of all the replication that is present on the infrastructure.

In this scenario, which tool accomplishes this task?

OnCommand System Manager

Storage Replication Adapter

OnCommand Unified Manager

OnCommand Workflow Automation

12. A customer has deployed OnCommand Unified Manager and wants to use it to manage their data protection relationships within their NetApp storage infrastructure.

In this scenario, which additional component must be deployed to satisfy this requirement?

OnCommandSystem Manager

NetApp SnapCenter

OnCommand Cloud Manager

OnCommand Workflow Automation

13. Which two NetApp features would help you to recover from a file share that was encrypted by a ransomware event? (Choose two.)

SnapLock

SnapMirror

SnapRestore

Snapshot

14. Click the Exhibit button.

In an ONTAP environment, an SVM-DR relationship exists between your AFF A220 cluster and your FAS2720 cluster, with identity preserve enabled. You are asked to test thedisaster recovery workflow in an upcoming maintenance window.

Referring to the exhibit, which step should be performed next to test the recovery workflow?

Delete the SVM-DR relationship.

Pause any ongoing transfers.

Abort any ongoing transfers.

Update any ongoing transfers.

15. You need to backup Exchange, MS SQL, and VMware virtual machines with application consistency.

Which tool accomplishes this task?

OnCommand System Manager

VMware vSphere Web client

SnapCenter

OnCommand Unified Manager

16. You are upgrading your Data ONTAP cluster from clustered Data ONTAP 8.3 to clustered Data ONTAP 9.1.

Which two actions must be performed for the SnapMirror relationships? (Choose two.)

Break existing SnapMirror relationships.

Delete the obsolete SnapMirror Snapshot copies which were created in Data ONTAP 8.3.

After the upgrade, resynchronize, and resume SnapMirror relationships.

Delete and re-create SnapMirror relationships.

17. You are monitoring data protection relationships of type XDR using OnCommand System Manager running ONTAP 9.5. In the GUI, you click Protection -> Volume Relationships.

In this scenario, which status in the Relationship State field must be displayed to ensure that the relationships are working as expected?

SnapMirrored

Uninitialized

InSync

Quiesced

18. An ONTAP administrator is trying to configure a three-way-disaster recovery solution. Cluster 2 is within 50 km of Cluster 1, the primarycluster, with an RTT of 7 ms. Cluster 3 is over 300 km from Cluster 1 with an RTT of 29 ms.

In this scenario, what are two topologies that would accomplish this task? (Choose two.)

a cascade topology from Cluster 1 to Cluster 2 with SnapMirror Synchronous, and then SnapMirror asynchronous from Cluster 2 to Cluster 3

a fan out topology with SnapMirror Synchronous from Cluster 1 to Cluster 2 and SnapMirror Synchronous to Cluster 3

a fan out topology with SnapMirror Synchronous from Cluster 1 to Cluster 2 and SnapMirror asynchronous from Cluster 1 to Cluster 3

a cascade topology from Cluster 1 to Cluster 2 with SnapMirror Synchronous, and then SnapMirror Synchronous from Cluster 2 to Cluster 3

19. A client has a primary data center that is located in a coastal area where the forecast is calling for a Category 5 hurricane to make landfall in three days. The client’s data is protected using NetApp SVM SnapMirror replication technology with identity-preserve that is enabled. The data is mirrored to a destination cluster outside of the affected area. The client has scheduled a controlled maintenance window for tomorrow to ensure that dependable operations are maintained.

Which three steps must be taken to accomplish this task? (Choose three.)

You must break the SnapMirror relationship on each individual volume between the source and the destination clusters.

You must configure the destination SVM volumes for data access.

You must reboot each server in your infrastructure so that they can access the data from the destination volumes.

You must break the SnapMirror relationship between the source and the destination SVMs.

You must stop the source SVM before activating the destination SV

20. You received an alert from OnCommand Unified Manager (OCUM) that a NetApp FlexVol is almost out of space.

Which three actions are available to perform from the OCUM events detail Web page? (Choose three.)

Acknowledge the event.

Mark the event as "resolved".

Create a job to move the FlexVol.

Increase the capacity of the FlexVol.

Add a note to the event.

Page 3 of 5

21. During NDMP incremental backups, you want to reduce the time spent finding the changed data between two Snapshot copies.

In this scenario, which ONTAP feature will accomplish this task?

compaction

deduplication

SnapDiff

SnapLock

22. A volume has been filled completely by active data and Snapshot copies.

What must you do to make the volume writable again?

Delete files in the active file system.

Delete any SnapMirror relationships.

Delete enough Snapshot copies until space is available.

Modify the Snapshot reserve.

23. A customer has ONTAP 9.5 clusters running at two nearby locations. The customer wants a zero RPO for one mission-critical volume.

In thisscenario, which two NetApp solutions satisfy this requirement while using the existing ONTAP clusters? (Choose two.)

SnapMirror Synchronous in StrictSync mode

FabricPool

SnapMirror Synchronous in Sync mode

SyncMirror

24. Your DevOps team reported that one virtual machine on a VMware datastore has been corrupted due to a ransomware attack.

In this scenario, which two methods would solvethe issue? (Choose two.)

Restore the Snapshot copy of the volume from ONTAP System Manager.

Restore the VM using SnapCenter Plug-in for VMware vSphere.

Restore the datastore using SnapCenter Plug-in for VMware vSphere.

Clone thevolume's Snapshot copy prior to the attack, mount, and storage vMotion.

25. Click the Exhibit button.

Referring to the exhibit, which three would be used to configure the three-way Data Center Disaster Recovery topology replication schedules? (Choose three.)

Active IQ Unified Manager

Active IQ

ONTAP CLI

ONTAP Select

ONTAP System Manager

26. You want to determine the amount of cold data that can be tiered from a FabricPool-enabled aggregate.

In thisscenario, which feature satisfies this requirement?

Inactive Data Reporting

Information Lifecycle Management

Object Store Profiler

Auto Balance

27. You noticed that your SnapVault relationship is healthy but that the destination volume does not have any Snapshot copies.

In this scenario, what should be performed to solve the problem?

Set up volume destination free space.

Set up volume source free space.

Use the snapvault update command.

Configure a rule with the Snapshot label.

28. You are asked to implement a NetApp solution that has high availability with transparent failover between two data centers.

Which two solutions satisfy this requirement? (Choose two.)

ONTAP Select

SnapVault

SnapMirror Sync

MetroCluster

29. To ensure enough bandwidth for other applications, you want to restrict all replication bandwidth on your destination cluster.

How would you accomplish this task?

Using OnCommand System Manager on your source cluster, create a QoS policy on the source.

Using the ONTAP CLI, enable global throttling on the source cluster.

Using OnCommand System Manager on your destination cluster, create a QoS policy on the destination.

Using the ONTAP CLI, enable global throttling on the destination cluster.

30. Which two statements are correct about configuring a peering connection between clusters? (Choose two.)

The LIFs should be on the same subnet.

You must use at least one intercluster LIF per node.

You must use one cluster LIF per node per network.

The intercluster LIFs must have full connectivity to each other.

Page 4 of 5

31. A customer wants a new solution that reaches a near-zero recovery time objective (RTO) and a zero recovery point objective (RPO).

In thisscenario, which NetApp solution satisfies the requirements?

NDMP

MetroCluster

SnapMirror

SnapVault

32. You have a network outage that affects client access to site A. You need to temporarily reverse the SnapMirror relationship of a volume to serve data from site B.

Which two steps must you perform first? (Choose two.)

B. Take the source volume offline.

C. Break the SnapMirror relationship.

D. Delete the SnapMirror relationship.

E. Abort the SnapMirror relationship.

33. You want to conserve disk space in your SnapVault destinations. You enable storage efficiency on each of the secondary volumes.

Which two statements are true in this scenario? (Choose two.)

Storage efficiency can be enabled on the secondary volume and SnapVault will manage the schedule.

Storage efficiency can be enabled on the secondary volume, but a manual schedule will need to be assigned.

If storage efficiency is enabled on the primary volume, it will be preserved on the secondary volume.

SnapVault implicitly uses storage efficiency.

34. You must determine if there have been any backup problems overnight.

Which two reports in OnCommand Unified Manager 6.2 would provide you with the required information?

(Choose two.)

Unresolved Incidents and Risks area

On Command Unified Manager Dashboard

On Command Cluster Events Details

On Command Job Events Details

35. Click the Exhibit button.

You need to verify that you have a 10 Gb path between two clusters for SnapMirror traffic. Referring to the exhibit, how fast is the network path between the clusters?

10 Mb

100 Mb

1 Gb

10 Gb

36. A customer is running ONTAP 9.7 on a FAS2720 cluster that has 12 x 4 TB NL-SAS drives in the chassis with capacity running low. You decide to use Fabric Pool technology to solve this problem.

What does the customer need to do to accomplish this task?

Add an SSD aggregate.

Purchase a Data Protection Optimized (DPO) license.

Use the CLI and add a capacity pool.

Use the wizard and add a capacity pool.

37. Data on an AFF system is replicated using SnapMirror to aFAS system that is configured with NL-SAS-based storage.

In this scenario, which storage efficiency is lost on the SnapMirror destination?

compaction

compression

aggregate-level deduplication

volume-level deduplication

38. A customer wants to set up SNMP to monitor their ONTAP platforms. Because of securityreasons, they need strong authentication and data encryption?

In this scenario, which SNMP version satisfies these requirements?

v2c

39. After deploying an ONTAP Select 2 node HA cluster at a remote site, you successfully perform manual takeover and giveback before placing the cluster into production. After the cluster runs in production for a week, you notice that you can no longer perform a manual takeover.

In this scenario, what are two causes of this problem? (Choose two.)

There is a network disruption between sites.

ONTAP Deploy has been deleted.

The vSphere HA service has failed.

The HA interconnect cables have been removed.

40. What are three methods of configuring SnapMirror replication relationships? (Choose three.)

Use Active I

Use the ONTAP command line.

Use OnCommand Insight.

Use ONTAP System Manager.

Use Active IQ Unified Manager.

Page 5 of 5

41. Click the Exhibit button.

A customer needs to add an additional X91143A card into a FAS9000 to allow mirroring between the production system and the disaster recovery FAS9000 platform. Slots 1, 4, 6, 8, and 9 have cards in them.

Referring to the exhibit, in which slot should you install the card?

42. Exhibit:

You are configuring a SnapMirror relationship to capture all daily activities and archive them. Information about the environment is shown in the exhibit.

In this scenario, how much data must be transferred during the scheduled SnapMirror update?

50 GB

250 GB

200 GB

150 GB

43. Which two NetApp products reduce the backup time and create a consistent backup for a primary Oracle target? (Choose two.)

SnapMirror for Open Systems

Open Systems SnapVault

SnapManager for Orade

SnapProtect

44. You are copying your data and replicating it off site.

What is the called?

a backup

a demonstration

a version

a Snapshot

45. Your customer wants to ensure that the SnapMirror relationships are easily managed in a bidirectional, multi-cluster environment.

Which version of clustered Data ONTAP would you recommend?

clustered Data ONTAP 9.1

clustered Data ONTAP 8.2.3

clustered Data ONTAP 8.3

clustered Data ONTAP 8.1.4

46. Which two configurations would be used to protect volumes in a production ONTAP system at twodifferent disaster recovery (DR) locations? (Choose two.)

SnapMirror in a fan-out topology

SVM DR in a cascade topology

SnapMirror in a cascade topology

SVM DR in a fan-out topology

47. Click the Exhibit button.

An employee’s computer and mapped home folder has been encrypted with ransomware.

You are asked to restore the data from a SnapVault repository.

Referring to the exhibit, what happens when the volume is restored?

All files in the volume are restored.

The restore is performed locally.

The original data is decrypted in place.

Only files that have changed in the volume are restored.

48. Click the Exhibit button.

You are configuring cluster peering from cluster2 to cluster1 on your ONTAP 9.7 clusters using ONTAP System Manager. You are given the details shown below to set up the cluster peer relationship. You want to determine why the peering has failed.

Cluster2 intercluster LIFIP: 192.168.0.143 Subnet: 255.255.255.0 Port: e0e passphrase:

netapp1234

Cluster1 intercluster LIF IP: 192.168.0.153 Subnet: 255.255.255.0 Port: e0e passphrase:

netapp1234

Referring to the exhibit, which statement is correct?

The Source Cluster IP is incorrect.

The Target Cluster Passphrase is incorrect.

The Target Cluster IP is incorrect.

The Source Cluster Passphrase is incorrect.

49. 1.You are using Veeam Backup & Replication to create Snapshot-based backups of your VMware environment running ONTAP. You added your primary and secondary ONTAP cluster to the Veeam Storage inventory.

However, you are unable to select your secondary ONTAP cluster as a secondary target for your Veeam backup job.

In ONTAP System Manager, which action solves this problem?

Select "Make Snapshot directory visible” for each volume that you want to back up.

Create a vsadmin account to grant cluster access to Veeamfor each volume that you want to back up.

Change the security style to NTFS for the volume you want to back up.

Initialize SnapVault for the volume that you want to back up.

50. You are planning to deploy MetroCluster IP. As part of the implementation strategy, you are asked to verify that youhave the relevant hardware for the deployment.

Which two elements are required to deploy your solution? (Choose two.)

storage controllers

FC network switches

cluster peering network

iSCSI Ethernet switches

The Most Updated NS0-527 Exam Dumps [2022] For NetApp NCIE-DP Certification Exam

The Most Updated NS0-527 Exam Dumps [2022] For NetApp NCIE-DP Certification Exam

Before attending the NS0-527 exam with the help of NS0-527 exam dumps, you can read NS0-527 free dumps below:

Share this post

Author

Related Posts