Latest CompTIA A+ 220-1101 Exam Dumps Questions - Good ITPrepare Preparation Materials

Latest CompTIA A+ 220-1101 Exam Dumps Questions – Good ITPrepare Preparation Materials

Eleanor2024-10-14T15:25:02+00:00

By Eleanor CompTIA, CompTIA A+

At ITPrepare, you can get the latest CompTIA A+ 220-1101 exam dumps questions, which should be your good preparation materials for passing the CompTIA A+ Certification Exam: Core 1 certification exam. Just go to ITPrepare to get the latest 220-1101 exam dumps questions. It is an online platform that provides 220-1101 Dumps in pdf format to help you read all the questions and answers easily. If you fail the CompTIA A+ Certification Exam: Core 1 exam, ITPrepare will refund your money. So, ITPrepare is a good platform for you to prepare yourself for CompTIA A+ certification in a better way.

Check CompTIA A+ Certification Exam: Core 1 220-1101 Free Dumps Questions Demo

Page 1 of 3

1. A colleague has a laptop that has been working as expected for several years wall outlet.

The MOST likely component that needs to be replaced is the:

power adapter.

battery.

system fan.

hard drive.

2. A technician is upgrading a legacy wireless router for a home user. After installing the new router and configuring the SSID to be the same, none of the devices will connect to the network .

Which of the following should the technician check NEXT?

OHCP pool configuration

MAC filtering list

Wireless protocol settings

ONS servers

3. A user failed to gain access to a building's entrance after security measures at the entrance were upgraded last week. The company implemented the 13.56MHz frequency short band, and users can now utilize their mobile devices to authenticate .

Which of the following has to be enabled for the mobile device to authenticate?

Bluetooth

Biometrics

NFC

4. Several users who share a multifunction printer in an office have reported unintended, thin, vertical lines that cover the entire height of every page printed from the printer .

Which of the following steps should a technician complete in order to MOST likely resolve this issue?

Replace the printer paper with a new ream.

Clear the print spooler on each computer.

Reinstall the printer driver on each computer

Perform the drum-cleaning procedure.

5. A technician identified an issue on a workstation, obtained details from the user, and made a backup of the system .

Which of the following should the technician do NEXT?

Determine the next steps to resolve the issue and document it.

Design a plan of action to resolve the issue and implement the solution.

Document the findings, actions, and outcomes.

Establish a theory of probable cause, researching internally or externally as needed.

6. Which of the following technologies can allow multiple networks to traverse a switch?

VLAN

VRRP

VPN

DHCP

7. A technician needs to install a cost-effective storage device into a rackmount server that will be used as a VM host. This storage will be used for all VMs that run from the server .

Which of the following should be used?

Optical disk drive

eMMC storage device

15,000rpm drive

RAID 10 array

8. An IT manager discovered that hundreds of pages of printed materials are being recycled each day because the materials are left on the printer tray instead of being picked up by users .

Which of the following would BEST prevent this waste?

Send friendly reminders to not print unnecessarily.

Enable duplex printing to reduce paper utilization.

Bill each department for the excess material cost.

Require a code or badge before releasing a print job.

9. An online retailer would like to add capacity to support increased sales. Additional servers have been installed .

Which of the following should be used to ensure each new server is being properly utilized?

Virtualization

Clustering

Load balancer

Round-robin DNS

10. A user, who is attempting to give a presentation via a projector in a conference room, reports the projector has video but no audio .

Which of the following will MOST likely resolve the issue?

Changing the input on the projector to VGA

Changing the output on the PC to DVI

Modifying the projector's refresh rate

Utilizing an HDMI connection

Page 2 of 3

11. A remote user called the help desk to report a notification indicating there is limited or no connectivity. The user can access local file folders and other local machines but none of the organization's servers or network items. Web pages do not appear to function either .

Which of the following is the MOST likely cause of the issue?

The user's internet connection is down.

The user's domain account is locked out.

The user's switch has stopped working.

The user's IP address needs to be renewed.

12. A company wants to use client-side visualization for application testing .

Which of the following configurations would BEST support this goal?

A)

Option A

Option B

Option C

Option D

13. DRAG DROP

An office manager reports that a printer is experiencing performance issues. Printouts are smudging when they are handled, and. recently, whenever the manager tries to print oversized documents, the paper jams before anything is printed on it.

14. A user's computer is not receiving a network connection. The technician confirms that the connection seems to be down and looks for the user's port on the patch panel. The port and patch panel are not labeled .

Which of the following network tools should the technician use to identify the port?

Network tap

Punchdown tool

Toner probe

Crimper

15. A user in a medical office contacts a technician regarding a printer that is used to print A4-sized labels. After the labels are printed, they mistakenly contain white space in the middle of the page .

Which of the following would MOST likely be the cause?

Contaminated fuser

Worn rollers

A misfeed

Page orientation

16. An engineer is experiencing unexpected reboots on a graphics workstation when rendering complex 3-D models. The workstation is configured with a 115V power supply that is rated at 200W and connected to a UPS. The central processing unit contains 16 hyperthreaded cores, and a discrete graphics solution utilizing an 8-pin power connector is installed in a PCI Express x16 slot .

Which of the following indicates where the technician should begin troubleshooting?

The UPS, as 115V is insufficient for the configuration and should be increased to 220V

The power supply, as 200W is insufficient when the GPU is heavily tasked

The graphics card, as it is the component that triggers the unexpected reboots

The motherboard, as only standard PCI slots should be used for high-end graphics cards, not PCI Express slots

17. A technician goes to a classroom to troubleshoot a projector that occasionally powers off. The technician recreates the issue and notices the projector will not power back on until approximately 15 minutes have passed. After 15 minutes of being powered on. the projector shuts off again .

Which of the following should the technician perform NEXT to resolve the issue?

Clean the filter.

Adjust the standby timeout.

Check the power cable connection.

Replace the bulb.

18. A technician is setting up a device to use two-factor authentication .

Which of the following meets this requirement?

Thumbprint/retinal scan

Password/password

Password/thumbprint

Password/PIN

19. An online retailer wants to save money and is considering migrating to the public cloud so peak is over .

Which of the following BEST describes this aspect of cloud computing?

Rapid elasticity

Metered utilization

Shared resources

High availability

20. A technician unboxed a new computer, plugged it in to a UPS. and connected the requested peripherals. The computer lights and fans turn on, but the technician hears three loud, consecutive beeps during boot .

Which of the following actions will remediate the issue?

Replacing the power supply

Replacing the UPS

Changing the CMOS battery

Reseating the RAM

Page 3 of 3

21. An organization is looking to upgrade the processing ability for its computers. Most users report that whenever multiple applications are being utilized, the system's response time slows down drastically. When only one application is open, the response time is acceptable .

Which of the following should be upgraded FIRST?

SSD

CPU

HDD

RAM

22. An administrator is configuring a corporate-owned smartphone for a new manager. The company requires the ability to wipe the phone's data remotely in the event of loss or theft and the capability to approve applications installed on the phone .

Which of the following tools would BEST meet this need?

Tethering to a corporate-owned laptop

WPA2-Enterpise wireless

Corporate enterprise email

Mobile device management

23. 1.A laptop PC user is reporting issues with the hard drive. A filesystem check shows that all files are accessible and the filesystem is clean. After the check, the PC still issues a hard drive error message .

Which of the following is the MOST likely cause of the error?

T failure

IOPS failure

DIMM failure

RAID failure

24. A field technician has been dispatched to a site with an internet outage. Upon arriving, the technician discovers that the POTS lines are not working as well .

Which of the following technologies is the site MOST likely using?

Fiber

Cable

DSL

Satellite

25. Which of the following would an administrator use to migrate virtual machines from on premises to the cloud?

laaS

SaaS

DBaaS

DRaaS

26. A technician needs to improve a workstation's overall response time for frequently used applications and data without removing the current hard drive .

Which of the following storage devices should the technician install to BEST accomplish the objective?

SAS

HDD

SCSI

27. A user takes a tablet to a technician because the cursor on it keeps drifting. The technician notices the screen does not appear to be damaged .

Which of the following is the MOST likely cause of the cursor issue?

The screen is physically damaged.

The screen rotation is incorrect.

The touch-pen battery is depleted.

The screen needs to be recalibrated.

28. Which of the following components enables the input on a mobile device's touch screen?

OLED

Digitizer

Inverter

CMOS sensor

29. Which of the following describes metered utilization of cloud resources?

Resources provisioned instantly

Payments made only for resources that are used

Resources pooled to increase computing power

Implementation of rapid elasticity

30. A company has a dot matrix printer that uses carbon paper. The company reports that the first page is printing too light, although the following pages are still legible .

Which of the following MOST likely needs to be fixed?

The print drum is worn and loose causing the printing to be light in places

The ribbon is low on ink or missing and must be replaced to get proper output

The heating element has failed, and a new one needs to be installed for proper transfer

The wrong type of filement is loaded, preventing it from sticking correctly

The fuser assembly is not calibrated properly, causing it to impact the paper too hard

Latest CompTIA A+ 220-1101 Exam Dumps Questions – Good ITPrepare Preparation Materials

Latest CompTIA A+ 220-1101 Exam Dumps Questions – Good ITPrepare Preparation Materials

Check CompTIA A+ Certification Exam: Core 1 220-1101 Free Dumps Questions Demo

Share this post

Author

Related Posts