Recommend Fortinet NSE5_FMG-7.0 Exam Dumps To All For Passing Successfully

Eleanor2024-10-14T15:35:53+00:00

By Eleanor Fortinet, NSE 5 Network Security Analyst

Do you know the available Fortinet NSE 5 Network Security Analyst certification exam? You can read the details in my article, “Free NSE5_FSM-5.2 Exam Dumps Online For Fortinet NSE 5 – FortiSIEM Certification“, and you will find that the NSE5_FMG-6.4 exam will be retired on August 31, 2022, the NSE5_FMG-7.0 has been launched. When preparing for the Fortinet NSE5_FMG-7.0 exam, you can get the Fortinet NSE5_FMG-7.0 exam dumps as the learning materials. The latest Fortinet NSE5_FMG-7.0 exam dumps are full of the actual questions and answers for helping you pass the Fortinet NSE 5 – FortiManager 7.0 certification smoothly and easily.

Test Fortinet NSE 5 – FortiManager 7.0 NSE5_FMG-7.0 Free Dumps Below

Page 1 of 2

1. What will happen if FortiAnalyzer features are enabled on FortiManager?

FortiManager will reboot

FortiManager will send the logging configuration to the managed devices so the managed devices will start sending logs to FortiManager

FortiManager will enable ADOMs automatically to collect logs from non-FortiGate devices

FortiManager can be used only as a logging device.

2. An administrator run the reload failure command: diagnose test deploymanager reload config <deviceid> on FortiManager.

What does this command do?

It downloads the latest configuration from the specified FortiGate and performs a reload operation on the device database.

It installs the latest configuration on the specified FortiGate and update the revision history database.

It compares and provides differences in configuration on FortiManager with the current running configuration of the specified FortiGate.

It installs the provisioning template configuration on the specified FortiGate.

3. Which two items does an FGFM keepalive message include? (Choose two.)

FortiGate uptime

FortiGate license information

FortiGate IPS version

FortiGate configuration checksum

4. Which two settings must be configured for SD-WAN Central Management? (Choose two.)

SD-WAN must be enabled on per-ADOM basis

You can create multiple SD-WAN interfaces per VDOM

When you configure an SD-WAN, you must specify at least two member interfaces.

The first step in creating an SD-WAN using FortiManager is to create two SD-WAN firewall policies.

5. An administrator wants to delete an address object that is currently referenced in a firewall policy.

What can the administrator expect to happen?

FortiManager will not allow the administrator to delete a referenced address object

FortiManager will disable the status of the referenced firewall policy

FortiManager will replace the deleted address object with the none address object in the referenced firewall policy

FortiManager will replace the deleted address object with all address object in the referenced firewall policy

6. An administrator has assigned a global policy package to a new ADOM called ADOM1.

What will happen if the administrator tries to create a new policy package in ADOM1?

When creating a new policy package, the administrator can select the option to assign the global policy package to the new policy package

When a new policy package is created, the administrator needs to reapply the global policy package to ADOM1.

When a new policy package is created, the administrator must assign the global policy package from the global ADO

When the new policy package is created, FortiManager automatically assigns the global policy package to the new policy package.

7. When an installation is performed from FortiManager, what is the recovery logic used between FortiManager and FortiGate for an FGFM tunnel?

After 15 minutes, FortiGate will unset all CLI commands that were part of the installation that caused the tunnel to go down.

FortiManager will revert and install a previous configuration revision on the managed FortiGate.

FortiGate will reject the CLI commands that will cause the tunnel to go down.

FortiManager will not push the CLI commands as a part of the installation that will cause the tunnel to go down.

8. In addition to the default ADOMs, an administrator has created a new ADOM named Training for FortiGate devices. The administrator sent a device registration to FortiManager from a remote FortiGate.

Which one of the following statements is true?

The FortiGate will be added automatically to the default ADOM named FortiGate.

The FortiGate will be automatically added to the Training ADO

By default, the unregistered FortiGate will appear in the root ADO

The FortiManager administrator must add the unregistered device manually to the unregistered device manually to the Training ADOM using the Add Device wizard

9. Which configuration setting for FortiGate is part of a device-level database on FortiManager?

VIP and IP Pools

Firewall policies

Security profiles

Routing

10. Refer to the following exhibit:

Which of the following statements are true based on this configuration? (Choose two.)

The same administrator can lock more than one ADOM at the same time

Ungraceful closed sessions will keep the ADOM in a locked state until the administrator session times out

Unlocking an ADOM will submit configuration changes automatically to the approval administrator

Unlocking an ADOM will install configuration automatically on managed devices

Page 2 of 2

11. In the event that the primary FortiManager fails, which of the following actions must be performed to return the FortiManager HA to a working state?

Secondary device with highest priority will automatically be promoted to the primary role, and manually reconfigure all other secondary devices to point to the new primary device

Reboot one of the secondary devices to promote it automatically to the primary role, and reconfigure all other secondary devices to point to the new primary device.

Manually promote one of the secondary devices to the primary role, and reconfigure all other secondary devices to point to the new primary device.

FortiManager HA state transition is transparent to administrators and does not require any reconfiguration.

12. What are two outcomes of ADOM revisions? (Choose two.)

ADOM revisions can significantly increase the size of the configuration backups.

ADOM revisions can save the current size of the whole ADOM

ADOM revisions can create System Checkpoints for the FortiManager configuration

ADOM revisions can save the current state of all policy packages and objects for an ADOM

13. 1.Which two statements about the scheduled backup of FortiManager are true? (Choose two.)

It does not back up firmware images saved on FortiManager.

It can be configured using the CLI and GU

It backs up all devices and the FortiGuard database.

It supports FTP, SCP, and SFT

14. Which two conditions trigger FortiManager to create a new revision history? (Choose two.)

When configuration revision is reverted to previous revision in the revision history

When FortiManager installs device-level changes to a managed device

When FortiManager is auto-updated with configuration changes made directly on a managed device

When changes to device-level database is made on FortiManager

15. Which three settings are the factory default settings on FortiManager? (Choose three.)

Username is admin

Password is fortinet

FortiAnalyzer features are disabled

Reports and Event Monitor panes are enabled

port1 interface IP address is 192.168.1.99/24

16. View the following exhibit.

If both FortiManager and FortiGate are behind the NAT devices, what are the two expected results? (Choose two.)

FortiGate is discovered by FortiManager through the FortiGate NATed IP address.

FortiGate can announce itself to FortiManager only if the FortiManager IP address is configured on FortiGate under central management.

During discovery, the FortiManager NATed IP address is not set by default on FortiGate.

If the FCFM tunnel is torn down, FortiManager will try to re-establish the FGFM tunnel.

17. You are moving managed FortiGate devices from one ADOM to a new ADOM.

Which statement correctly describes the expected result?

Any pending device settings will be installed automatically

Any unused objects from a previous ADOM are moved to the new ADOM automatically

The shared policy package will not be moved to the new ADOM

Policy packages will be imported into the new ADOM automatically

18. An administrator would like to review, approve, or reject all the firewall policy changes made by the junior administrators.

How should the Workspace mode be configured on FortiManager?

Set to workflow and use the ADOM locking feature

Set to read/write and use the policy locking feature

Set to normal and use the policy locking feature

Set to disable and use the policy locking feature

19. An administrator with the Super_User profile is unable to log in to FortiManager because of an authentication failure message.

Which troubleshooting step should you take to resolve the issue?

Make sure FortiManager Access is enabled in the administrator profile

Make sure Offline Mode is disabled

Make sure the administrator IP address is part of the trusted hosts.

Make sure ADOMs are enabled and the administrator has access to the Global ADOM

20. What is the purpose of the Policy Check feature on FortiManager?

To find and provide recommendation to combine multiple separate policy packages into one common policy package

To find and merge duplicate policies in the policy package

To find and provide recommendation for optimizing policies in a policy package

To find and delete disabled firewall policies in the policy package

Recommend Fortinet NSE5_FMG-7.0 Exam Dumps To All For Passing Successfully

Recommend Fortinet NSE5_FMG-7.0 Exam Dumps To All For Passing Successfully

Test Fortinet NSE 5 – FortiManager 7.0 NSE5_FMG-7.0 Free Dumps Below

Share this post

Author

Related Posts