UIPATH-ARDV1 Exam Dumps [2022 Updated] To Be Good Materials For Success

Eleanor2024-10-14T15:36:48+00:00

By Eleanor UiPath, UiPath Certified Professional - Developer Track

If you wish to pass UiPath Advanced RPA Developer v1.0 Exam (UiARD) certification exam successfully, you can choose UIPATH-ARDV1 Exam Dumps as the learning materials. To be UiPath Advanced RPA Developer v1.0 Exam (UiARD) certified will:

evaluates your ability to build complex and efficient RPA solutions independently
recommended for candidates with 6+ months of working experience in developing RPA solutions
be suitable for professionals in technical RPA roles, such as Advanced RPA Developers, Solution Architects, RPA Architects, and others

The updated UIPATH-ARDV1 exam dumps with correct questions and answers will be your good study materials for preparation. You will be guaranteed to pass UiPath Advanced RPA Developer v1.0 Exam (UiARD) successfully.

Read UIPATH-ARDV1 Free Dumps First

Page 1 of 6

1. A developer needs to automate a process which involves capturing support ticket numbers from the email subject line. For example, the email subject line includes: "Action Required

C XA/135" where "XA/135" is the ticket number. The robot should validate the pattern of the ticket number before proceeding.

Which expression exclusively matches the ticket number pattern from the subject line?

Option A

Option B

Option C

Option D

2. Review the following exhibit:

Based on the exhibit, what is the result of the Write Line in the sequence?

123

True

Hello

123True

3. A developer needs to create an automation process that identifies a file with format "Monthly_Report_MMddyyyy.xlsx". The file name is saved to a variable called strinput.

To extract the date from strinput, which string manipulation method should be used?

strinput.Substring(strInput.LastIndexOf("_")+1,8)

strinput.Substring(strInput.IndexOf("_")+1,strInput.IndexOf(".")1)

strinput.Substring(strInput.IndexOf("_")+1.8)

strinput.Substring(strInput.IndexOf("_")+1,strInput.IndexOf("."))

4. Review the following exhibits:

Based on the exhibits, what is the output of the sequence?

<blank line> A2X9k

A1bx3 A1bx3

A1bx3 A2X9k

A2X9k A2X9k

5. A developer configured the properties for a Click activity on an element inside a web page as shown in the exhibit. An animation on the web page never completely loads but the element specified in the Click activity does.

What occurs when this Click activity executes?

Timeout error occurs without clicking on the element.

Waits 10 seconds before clicking on the element.

Continues to the next activity after 30 seconds without clicking on the element.

Element is clicked once it is fully loaded.

6. A developer plans to create a process to automate a web application. The web application requires HTML buttons and text boxes to be loaded. Although some assets may still be loading, the robot should perform the UI actions once the buttons and text boxes are loaded.

Which property should be configured?

TimeoutMS = 10000

WaitForReady = Complete

TimeoutMS = Int32.MaxValue

WaitForReady = Interactive

7. If a developer wants to use a variable of type UIElement to identify a button in a Click activity, which property must be manually configured during development?

Element

Selector

ClippingRegion

WaitForReady

8. You are developing a .xaml file to interact with multiple fields of a web page. You want to Auto Empty the fields that require input.

Which input method(s) will automatically empty the target input fields?

"SendWindowMessages" only

"Default" and "SimulateType"

"SimulateType" only

"SimulateType" and "SendWindowMessages"

9. A developer configured the Activity Project Settings for a UI automation and a Click activity in the project shown in the following exhibits:

If the target element is not found during execution in Debug mode, how long will it take until an error is thrown?

10 seconds

15 seconds

20 seconds

30 seconds

10. Allow the user to interact with separate desktop applications at the same time.

Which workflow activity requires modifications to some of the properties' default values to ensure this process runs in the background?

Get Text

Element Exists

Select Item

Type Into

Page 2 of 6

11. A developer wants to use the Dispatcher and Performer architecture.

What describes the characteristics of a Dispatcher and a Performer process?

Dispatcher is used to add Queue Items to an Orchestrator Queue Performer should be created in the REFramework

Dispatcher can only interact with one Orchestrator Queue Performer is used to process Queue Items one at a time

Dispatcher is used to process transaction items from an Orchestrator Queue Performer can interact with multiple Orchestrator Queues

Dispatcher is always created in the REFramework Performer can only interact with one Orchestrator Queue

12. While working with a queue in Orchestrator, you notice that the status of one of the Queue Items has changed to Abandoned.

When does this happen?

When the item remains in the "Failed" status for approx. 24 hours

When the item remains in the "In Progress" status for approx. 24 hours

When the item remains in the "Retried" status for approx. 24 hours

When the item remains in the "New" status for approx. 24 hours

13. A developer wants to design a process in which multiple decision points will be used to accommodate complex scenarios.

In UiPath Studio, which recommended type of workflow meets this requirement?

State Machine

Sequence

Global Exception Handler

Flowchart

14. You want to automate a process on the https://acme-test.uipath.com/work-items web page.

On this page, the following table is displayed:

You observe that the selector of the element highlighted in red is:

<html app='chrome.exe' title='ACME System 1 - Work Items' />

<webctrl tag='TABLE' />

<webctrl tag='TD' tableCol='2' tableRow='2' />

What is a valid selector to get the 5-th element in the WIID column?

15. Where in the Robotic Enterprise (RE) Framework template project is the SetTransactionStatus.xaml invoked?

In the Finally section of the Try Catch activity in the End Process state.

In the Try section of the Try Catch activity in the Process Transaction state.

In the Finally section of the Try Catch activity in the Process Transaction state.

In the Try section of the Try Catch activity in the End Process state.

16. A developer creates a Dispatcher which extracts information from the top 30 mail messages in Microsoft Outlook and uploads that information into a queue.

What is the recommended way to avoid processing duplicates of the same Queue Items?

Create an Excel file of processed Queue Items and loop through the list to check if the current Queue Item has been processed before.

Add a descriptive "Reference" in the "Add Queue Item" activity and check that it does not equal the "Reference" of the Queue Item last processed.

Set the "Unique Reference" of the queue to "Yes" and "Auto Retry" of the queue to "No".

Set the "Unique Reference" of the queue to "Yes" and add a descriptive "Reference" in the "Add Queue Item" activity.

17. DRAG DROP

From the lowest priority to the highest priority, what is the correct priority sequence of the Log Levels for UiPath Robots? NOTE: Drag and drop the lowest priority level to the top of the list and repeat until the highest priority level appears at the bottom of the list.

18. DRAG DROP

Based on the exhibit that represents the "Deadline" in the yyyy-mm-dd format, what is the correct sequence in which the Queue Items are processed by a single Performer workflow? NOTE: Drag the Queue Item Name found on the “Left” and drop on the correct Process Order found on the “Right”

19. A developer created a custom rule for Workflow Analyzer and wants to make it available only at the project level.

Which action should the developer perform?

Create an external assembly (.dll) of the rule and copy it to the Studio install location.

Create an external assembly (.dll) of the rule and copy it to the project location.

Create a Nuget package (.nupkg) of the rule and publish it to Orchestrator.

Create a Nuget package (.nupkg) of the rule and install it in a Studio project as a dependency.

20. When debugging a process, you run in Debug mode and are paused at a breakpoint.

To quickly execute the activity with the breakpoint and proceed with the execution, which button should be clicked on the Execute tab of Studio?

Step Into

Break

Step Over

Continue

Page 3 of 6

21. How can you find all anchor elements in a web page?

Using the Find Relative Element Activity

Using the Get Ancestor Activity

Using the Find Element Activity

Using the Find Children Activity

22. A developer used title='1 writtenNotes - Notepad' as an attribute of a selector. The first character of the Notepad file name changes dynamically based on the .txt file used to open the file.

If the developer wants the selector to identify the Notepad by everything but the first character, how should title be replaced?

title='* writtenNotes - Notepad'

title='? - Notepad'

title='? writtenNotes - Notepad'

title='* - Notepad'

23. In UiPath Studio, what describes project validation and workflow analysis?

Validation of the file or project is performed whenever the Workflow Analyzer is triggered.

Validation of the file or project is performed after the Workflow Analyzer finishes the report.

Validation of the file or project is performed only if the user triggers Validate File and Validate Project.

Validation of the file or project is performed only when running or debugging.

24. A new blank project only has the Main.xaml file and consists of a single Throw activity. The activity is not enclosed in a Try Catch activity.

If this process is published and run from Orchestrator, what is the expected result?

Exception Pop-up is displayed on the robot machine.

Job is completed with a "Stopped" state.

Job is completed with a "Successful" state.

Job is completed with a 'Faulted" state.

25. A database, DT1, is shown in the following exhibit:

The Filter Wizard of a Filter Data Table activity is shown below:

What is the result after the activity has executed?

DT1 is unaffected by the settings of the Filter Wizard.

DT1 is returned as an empty datatable.

DT1 is overwritten based on the settings of the Filter Wizard.

A runtime error will be thrown.

26. 1. In which situation can "idx" be used in a reliable selector?

When the exact n-th element in a static UI list is needed in the process

When the "idx" value is either 1 or 2

When the selectors of the elements in the application rarely change

When a dynamic selector is required

27. A developer wants to extract data from "Sheet1" of the "Test.xls" file using the following code:

In addition, the developer configured the following properties of the Read Range activity:

Based on the exhibits, what is the result of the execution?

OutputDataTable object will have 2 columns and 1 row containing values of cells "A1" and "B1"

OutputDataTable object will have 2 columns and 1 row containing values of cells "A2" and "B2"

OutputDataTable object will have 2 columns and 2 rows containing values of cells "A2" and "B2"

OutputDataTable object will have 2 columns and 10000 rows; the first row will contain values of cells "A1" and "B1"

28. A developer uses Workflow Analyzer with the default rules to check if a project follows best practices. In one of the workflows, the Properties of a Click activity is shown in the following exhibit.

Which warning will be shown in the Analyzer output for this activity?

Timeout values is not defined in activity Click Calculator button

Hardcoded delays used in activity Click Calculator button

Activity Click Calculator button has a default name

SendWindowMessages not checked in activity Click Calculator button

29. A developer is adding a Log Message activity in an Exit section of a single state within a state machine. When will the Log Message activity in the Exit section be executed?

After the activities in the Entry section and the activities in the trigger are executed.

After the activities in the Entry section are executed, but only if there are exceptions.

Immediately after the activities in the Entry section are executed.

After the activities in the Entry section are executed and the transition to the next state is confirmed.

30. While automating an installation wizard, a pop-up window may or may not appear.

What can you use to close the window without stopping the workflow?

Use a Click activity inside a Try Catch activity.

Use a Click activity with the ContinueOnError property set to True.

Use a Click activity and set its TimeoutMS property to 30.

Page 4 of 6

31. A developer created a process with the Robotic Enterprise (RE) Framework, uploaded the package on the Orchestrator, and created a job for it. Once these steps are performed, the job is started from the Orchestrator and begins to process transactions. After two processed transactions, the job is stopped from Orchestrator.

At which point in the workflow will this job stop?

After the currently running workflow is executed because the stop command is propagated to the robot and the execution will be ended.

Next time the Get Transaction Data state is executed, the stop command is detected and the execution transitions to the End Process state.

Immediately, because the stop command is propagated to the robot and the execution will be ended.

After the current transaction is finished, the Process Transaction state will detect the stop command and transitions to the End Process state.

32. A developer was reviewing an Orchestration process whose "main" attribute is set to Main.xaml in project.json.

However, the process is not pausing as intended.

What is a possible cause for this issue?

UI activities were not used in the process.

"Wait for Form Task and Resume" activity was called in Main.xaml.

Process created a task in the Orchestrator.

"Wait for Form Task and Resume" activity was called in GetApproval.xaml.

33. A developer is using GIT for version control.

While the developer is attempting to Commit and Push a local file to the repository, the following pop-up message is displayed:

What is the reason for the pop-up message?

Project was not properly checked out in Studio and merge failed into the master.

Local repository is not synchronized with the remote one.

Opened project was disconnected from the source control.

Local version was not connected to any branch.

34. A developer wants to ensure that a process they are developing includes coherent logs with meaningful log messages. During the execution of the process, an application exception is caught and stored in a local variable called exception.

Based on UiPath best practices, how should the Log Message activity in the Catch section of this exception be configured?

Level: Warn Message: exception.Message + "at" + exception.Source

Level: Error Message: "Exception occurred at" + exception.Source

Level: Fatal Message: exception.Message

Level: Info Message: "Application Exception at" + exception.Source

35. Emails that Excel file as an attachment

While creating this process, the developer notices that two activities with the same name can write the scraped DataTable to Excel.

What are the differences between the Workbook and Excel Write Range activities?

Excel Write Range activity can only be used when Excel is installed. Workbook Write Range activity can be faster by writing the data directly to the file.

Excel Write Range activity only works in the foreground, visible to the user. Workbook Write Range activity only works in the background.

Excel Write Range activity will create the file in the WorkbookPath property if it does not exist. Workbook Write Range activity can only be used when Excel is installed.

Excel Write Range activity only works in the background. Workbook Write Range activity will create the file in the WorkbookPath property if it does not exist.

36. Based on the configuration shown in the exhibit, what is the result of the execution of these activities if the target element does not exist at runtime?

"Pop-up exists" message is logged

Robot continues to look for the target element until the execution is manually stopped

Execution completes successfully without logging a message

Activity Timeout Exceeded error is received

37. Log out and close the company's application

The developer needs to create a process using the Dispatcher/Performer architecture for the company.

Which steps will be included in the Dispatcher process?

1-3

1-4

3-4

3-6

38. A developer wants to create an attended automation process. The process will take information from emails in the current user's inbox.

Assuming the email/domain or password for the user's email inbox are not provided in the automation, which activity can be used to get unread emails with the subject line "Email for Robot"?

Get Exchange Mail Messages

Get POP3 Mail Messages

Get Outlook Mail Messages

Get IMAP Mail Messages

39. In the UiPath Robotic Enterprise Framework template, in the Get Transaction Data state of the Main workflow, what happens before the next transaction item is retrieved?

We check if the previous transaction has been completed

We check if a kill signal was sent from Orchestrator

We check if a stop signal was sent from Orchestrator

40. DRAG DROP

In a Robotic Enterprise (RE) Framework project that is connected to Orchestrator, what is the correct sequence of steps if an application exception occurs on a Queue Item in the Process Transaction state?

NOTE: Drag the Description found on the “Left” and drop on the correct Step Sequence found on the “Right”.

Page 5 of 6

41. A developer used the Robotic Enterprise (RE) Framework to implement an automation of a website. For security reasons, the credentials for the login are stored in the Orchestrator.

Which steps should the developer perform to use these credentials in the project?

Add a row in the Constants sheet in Config.xlsx with the name of the Orchestrator asset. Use the Get Credential activity in the login workflow to get the username and password.

Add a row in the Settings sheet in Config.xlsx with the name of the Orchestrator asset. Use the Get Credential activity in the login workflow to retrieve the username and password.

Add a row in the Assets sheet in Config.xlsx with the name of the Orchestrator asset. Use the Get Credential activity in the login workflow to get the username and password.

Add a row in the Assets sheet in Config.xlsx with the name of the Orchestrator asset. In the login workflow, retrieve the username and password by referencing the Config dictionary.

42. A developer entered custom values in the Browser property in the UI Automation section of the Activity Project Settings menu.

Which set of activities can be affected by this change?

Navigate To and Attach Browser

Open Browser and Navigate To

Open Browser and Close Tab

Attach Browser and Open Browser

43. You want to identify a selector for a button in an application. The selector will be used as the target in a Click activity.

In order to ensure the Click activity executes as intended, how many elements should the selector be valid for at runtime?

1 element

2 elements

3 elements

5 elements

44. In the Robotic Enterprise (RE) Framework, what is the initial value of TransactionNumber?

[]

Nothing

45. An RPA developer needs to perform a code review on a process to ensure best practices were used. During the code review, the developer discovers that the workflows cannot be easily tested and some refactoring of the code is required.

Based on best practices, which approach is recommended?

Create unit tests only for the workflows that need to be refactored.

Split the logic into reusable workflows and use arguments when needed.

Rewrite all the workflows using best practices.

Use manual end-to-end testing and refactor only the tested workflows.

46. You are working on a project with three other developers and are using TFS source control in UiPath Studio.

If you want to ensure you have the newest version from the server on your local machine, which TFS/SVN command should be used?

Check Out For Edit

Commit

Show Changes

Get Latest Version

47. A developer automates a process which has an Excel file as input data; however, Orchestrator is not available. As a result, the developer needs to adapt the Robotic Enterprise (RE) Framework for use with tabular data.

Based on UiPath best practices, where should the Excel file be read and stored in a global DataTable variable?

In the new state in the Main.xaml that transitions from Init.

In the InitAllApplications.xaml workflow.

In the Get Transaction Data state in the Main.xaml.

In the Ina state of the Main.xaml in the First Run sequence.

48. You are invoking a workflow file called SecondaryWorkflow.xaml from PrimaryWorkflow.xaml.

The following shows the Import Arguments panel of the Invoke Workflow File activity:

In addition, the following reflects the Arguments panel in SecondaryWorkflow.xaml:

You use a Log Message activity in "SecondaryWorkflow.xaml" to print the value of the argument "in_WelcomeMessage".

What is the expected result of executing "PrimaryWorkflow.xaml"?

Log message "Hi, I reside at the Secondary file"

Log message "Hi, I am passed from the Primary file"

A System.InvalidCastException is thrown at the Invoke Workflow File activity

A System.ArgumentException is thrown at the Invoke Workflow File activity

49. A developer is working on an automation. The automated process must log into Citrix and click on the "Generate Shipment Details" button. Ideally, this generates a table of shipping records. If the generated table displays only the header row and no data is available, then it should be marked as an exception since the data is incomplete.

What is this type of exception?

BusinessRuleException

NullReferenceException

ApplicationException

SystemException

50. The retrieving of the data or clicking the button must be tried until successful.

Based on UiPath best practices, what must the developer use to ensure that an error is thrown if the label text or the button element does not load?

Use the Get Text activity with the default timeout and set the ContinueOnError property to "True". Use the Click activity in the Retry Scope activity.

Use the Get Text activity with the default properties in a Retry Scope activity. Use the Click activity with the default properties in a Retry Scope activity.

Modify the Get Text activity by increasing the timeout property. Use the Click activity to click the button with the default settings.

Use the Get Text activity with the default timeout and set the WaitForReady property to "None" in a Retry Scope activity. Modify the Click activity by increasing the timeout property and set the ContinueOnError property to "True".

Page 6 of 6

51. You recently observed a developer using the SecureString variable type in their workflow.

What is a UiPath best practice relative to the use of SecureString?

Name of the SecureString variable should include the prefix "str_".

SecureString variable scope should be limited to the scope where it is created.

A workflow file should not contain more than one SecureString variable.

SecureString variable should be assigned to an argument.

52. You have two variables, varA and varB, as shown in the following exhibit:

What is the output of the Write Line activity?

246246

123123246

246123123

123123123123

53. A developer published a library component for use within UiPath Studio.

In order to successfully add this library as a dependency to the project, what should be used?

Invoke Com Method activity

Imports Panel

Invoke Method activity

Manage Packages Window

54. A developer was assigned a task to build a process that will interact with hidden or minimized windows on an employee's machine.

To ensure the UI automation runs in the background which commonly used activity property must always be avoided?

Default

Simulate Type

Activate

SendWindowMessages

55. A developer reviewed the following sequence:

The parameters of the Invoke Method are:

In order to get the table name of the first element in the DataSet, which expressions should the developer use?

DataSet.Tables(0).TableName

DataSet.Tables(1).TableName

DataSet.Rows(0).TableName

DataSet.Rows(1).TableName

56. Which file in the Robotic Enterprise (RE) Framework reads the Data/Config.xlsx file and retrieves assets from Orchestrator into the process?

KillAllProcesses.xaml

InitAllApplications.xaml

InitAllSettings.xaml

Process.xaml

57. A developer needs to reference the element in the first row of the "ID" column in the System.Data.DataTable, "DT".

Which expression is used to reference this element?

Rows(0).ID

Rows(1).ID

Rows(0).Item("ID")

Rows(1).Item("ID")

58. What represents an example of a full selector?

59. A developer is creating an automation project which processes personal information of employees.

To protect sensitive information that is logged during the execution of the automation at the Verbose level, how can the developer avoid logging variable and argument values in both Orchestrator and Studio?

Store all sensitive information in an Excel file that the process can access.

Check the Isolated property when invoking a workflow with sensitive information.

Ensure all personal information variables are of the SecureString variable type.

Check the Private property on the activities that contain sensitive information.

60. When fine-tuning a dynamic selector, how many characters does "*" replace?

Zero or more

Exactly one

One or more

More than one

UIPATH-ARDV1 Exam Dumps [2022 Updated] To Be Good Materials For Success

UIPATH-ARDV1 Exam Dumps [2022 Updated] To Be Good Materials For Success

Read UIPATH-ARDV1 Free Dumps First

Share this post

Author